Repro. Pair. No brackets, spindle only. 13/16”-20 stud thread. Spindle shaft is 40CR and upright .450-10 ductile iron.
*NOTE: These spindles use 70-73 style outer tie rods, bearings, races, seal and 13/16”-20 spindle hardware. *
Ford Mustang Years:
1968 (68), 1969 (69), 1970 (70), 1971 (71), 1972 (72), 1973 (73)
Above years shown are used for searches and are not application listings.
Mercury Cougar Years:
1968 (68), 1969 (69), 1970 (70), 1971 (71), 1972 (72), 1973 (73)
Above years shown are used for searches and are not application listings.
Ford Falcon and Ranchero Years:
1970 (70)
Above years shown are used for searches and are not application listings.
Ford Fairlane and Ranchero Years:
1970 (70)
Above years shown are used for searches and are not application listings.
Ford Torino and Ranchero Years:
1970 (70), 1971 (71)
Above years shown are used for searches and are not application listings.
NPD Part Number : 3106-3B Manufacturer Reference #'s: D0OZ-3105-B, D0OZ-3106-B, D1ZZ-3105-A, D1ZZ-3106-A
1968-1969 MUSTANG W/ DISC, MUST USE OUTER TIE ROD, BEARING, RACES AND NUTS FROM 70-73
1970-1973 MUSTANG W/ DISC, EXCL SHELBY
1968-1969 COUGAR W/ DISC, MUST USE OUTER TIE ROD, BEARING, RACES AND NUTS FROM 70-73
1970-1973 COUGAR W/ DISC
1970-1971 TORINO DISC BRAKE
1970-1970 FALCON (FROM 1/1/70), DISC BRAKE
1970-1970 FAIRLANE DISC BRAKE
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Submitted on January 22, 2021 by Derek B.
YES I would recommend this product.
Quality
Value
A few things to know: 1. Factory caliper bracket bolt (big one) won't fit thru hole in spindle. You must bore it out w/ a 3/4 drill. 2. The tie rod hole was milled too thin, causing the tie rod stud to be too tall for the cotter pin to lock properly 3. The spindle is too long. You will have issues using a grease cap on the rotor.
Submitted on October 25, 2023 by Bill Q.
YES I would recommend this product.
Quality
Value
In Stock!