Ford Performance GEN 3 5.0L NMRA COYOTE STOCK SEALED ENGINE (M-6007-M50SB)

FORD PERFORMANCE GEN 3 5.0L NMRA COYOTE STOCK SEALED ENGINE, M-6007-M50SB, SEE ONLINE FOR MORE DETAILS

'Sealed' Gen 3, 2020 Coyote crate engine for use by NMRA-Coyote stock racing competitors ONLY*, the Ford Performance all-aluminum 2020 5.0L Coyote crate engine is a modern 5.0L 32-valve DOHC V-8 that uses advanced features like Twin Independent Variable Camshaft Timing (Ti-VCT) to deliver 460 horsepower @ 7,000 rpm and 420 ft.-lb.+ of torque @ 4,600 rpm (with premium fuel). Thelightweight aluminum cylinder block features cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength, optimized oil drainback and windage control to improve high-rpm performance.

*** All Ford Performance Engines are shipped via LTL truck freight with a preset charge. Free counter pick-up is available at any of our four locations. Counter-pick-up orders are not available online and will need to be placed over the phone. Please call your local NPD store for counter orders, time frames, and pick-up details. (Florida 1-800-874-7595), (North Carolina 1-800-368-6451), (Michigan 1-800-521-6104), (California 1-800-235-3445) ***

Engine Features and Options:
-460 horsepower 420 ft.-lb.+ of torque
-12.0:1Compression ratio
-Hypereutectic aluminum pistons
-Sintered steel connecting rods as used on Boss 302 Mustang
-Forged steel crankshaft
-Steel billet oil pump gearsM-6600-M50A
-Aluminum block featuring plasma transferred wire arc transferred spray weld liner
-8qt capacity oil pan
-Tuned composite intake manifold provides efficient air delivery and weight savings
-80 mm single bore "drive by wire" throttlebody with variable runner control
-Aluminum cylinder heads, DOHC, four valves per cylinder, Variable intake and exhaustcamshaft timing
-Includes manual transmission engine harness and flywheel
-Vehicle harness and PCM not included
-Use Ford Performance Controls PackM-6017-M50B
-Does not include alternator, for alternator kit seeM-8600-M50BALT
-Engine mount bosses and bell housing mount pattern common to 4.6L modular engines
-Photo and specs may vary.
-Engine weight: 425 lbs (without accessories)

Racing Note:
*Proof of NMRA membership/competition license must be provided to frpp@ford.com. Contact the Ford Performance Parts Tech-line @ 800-367-3788 for more details.

Emissions Note:
This part is designed and intended for competition use only or off-highway use only. It should not be installed on a vehicle that is driven on public roads and highways. Installation of this part on a vehicle driven on public roads and highways is likely to violate U.S. and Canadian laws and regulations relating to motor vehicle emissions.

NPD Part Number : M-6007-50CS
Manufacturer Reference #'s: M-6007-M50SB