COVER KIT, AXLE HOUSING, FORD PERFORMANCE, M-4033-KA, GT500 FINNED ALUMINUM STYLE, INCL (1) AXLE COVER W/ DRAIN AND FILL PLUGS, (10) OE STYLE MOUNTING BOLTS, (1) VENT PLUG, DESIGNED TO REDUCE REAR GEAR OIL TEMPERATURE
This GT500 rear axle housing cover kit features the Ford Performance part number M-4033-KA and is designed to be a direct fit for your 1986 thru 2014 Mustang with a 8.8 rear axle. This unit was original equipment on 2013-2014 Mustang Shelby GT500 with the track pack option. This unit is designed to upgrade from the factory stamped steel unit and are recommended for road racing or extended high speed / high temperature applications to reduce gear oil break down. The cooling fins help reduce the gear oil temperature and allow for increased gear and bearing life. The cover is also machined for differential cooler pickup and return fittings 1/2-14 NPSF dryseal straight pipe threads. These fittings can be used for a external cooler or for fill and drain ports for easy fluid change. The cover is also machined for temp sensor with M10 x 1.6-6h threads. Each unit includes the correct mounting hardware needed for proper installation as well as the correct drain, fill and vent cover plugs. So, if you are looking for a axle cover that not only support but also cools better then the factory unit look at picking up one of these units from NPD today!
Features and Options:
-Original equipment on 2013-2014 Mustang Shelby GT500 with Track Pack option
-Fits 8.8" Ford rear end, except IRS
-Recommended for road racing or extended high speed/high temperature applications to reduce gear oil break down, increase gear and bearing life
-Cooling fins help reduce gear oil temperature
-Cover machined for differential cooler pickup and return fittings- 1/2 -14 NPSF dryseal straight pipe threads
-Pipe plugs installed, must be removed to install differential cooler fittings
-Includes 10 hex-head bolts with anaerobic yellow thread locking compound
-Includes 7/16-20 UNF vent plug when used in applications with alternative vent provisions
-Cover machined for temp sensor with M10 X 1.6-6h threads
-Note: Will not fit IRS Differential or with Differential mounted Anti-lock Brake Exciter Ring
Installation Note:
Please check exterior clearance to chassis and suspension. This unit will not fit 8.8 IRS rear suspension. See NPD part number M-4033-125G for correct 99-04 Cobra IRS Axle Girdle cover.
Draining the rear differential will be required when installing this new Ford Performance unit. NPD offers a full line of high quality Motorcraft gear oil as well as the correct friction modifier need to get you back on the road.
Note:
This unit is designed does not included or use a factory style gasket. This unit according to Ford is designed to be used with silicone gasket maker. See NPD part numbers F-19562-1 or 910-7
Ford Mustang Years:
1986 (86), 1987 (87), 1988 (88), 1989 (89), 1990 (90), 1991 (91), 1992 (92), 1993 (93), 1994 (94), 1995 (95), 1996 (96), 1997 (97), 1998 (98), 1999 (99), 2000 (00), 2001 (01), 2002 (02), 2003 (03), 2004 (04), 2005 (05), 2006 (06), 2007 (07), 2008 (08), 2009 (09), 2010 (10), 2011 (11), 2012 (12), 2013 (13), 2014 (14)
NPD Part Number : M-4033-3KA Manufacturer Reference #'s: M-4033-KA
1986-1993 MUSTANG 8.8 INCH REAR AXLE
1994-2004 MUSTANG 8.8 INCH REAR AXLE
2005-2014 MUSTANG 8.8 INCH REAR AXLE
0-0 NOTE: WILL NOT FIT IRS REAR DIFFERENTIAL OR WITH
0-0 ANTI LOCK BRAKE EXCITER RING
1985-1995 BRONCO FORD 8.8 INCH REAR AXLE
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Out of Stock
