Ford Performance 7.3L SUPER DUTY TRUCK ENGINE (M-6007-73)

FORD PERFORMANCE 7.3L V8 430HP SUPER DUTY CRATE ENGINE, M-6007-73, 10.5 TO 1 COMPRESSION RATIO, CAST ALUMINUM PISTONS, FORGED STEEL CRANKSHAFT, CAST IRON BLOCK, ALUMINUM CYLINDER HEADS, SEE ONLINE FOR MORE DETAILS

If you are looking for a all in one engine package for your Mustang or Ford vehicle then picking up one of these Ford Performance 7.3L SUPER DUTY Crate engines might be just what you are looking for. This engine features the Ford Performance part number M-6007-73 and is designed to add power and performance to your Ford. This engine is designed to help save you money and time by putting the right parts together to ensure a long lasting engine.

*** All Ford Performance Engines are shipped via LTL truck freight with a preset charge. Free counter pick-up is available at any of our four locations. Counter-pick-up orders are not available online and will need to be placed over the phone. Please call your local NPD store for counter orders, time frames, and pick-up details. (Florida 1-800-874-7595), (North Carolina 1-800-368-6451), (Michigan 1-800-521-6104), (California 1-800-235-3445) ***

Manufacture Note:

The ALL-NEW 7.3L V8 Ford gasoline crate engine from the 2020 F250 Super Duty

Engine Features and Options:
-7.3L displacement
-Bore 107.2 mm x stroke 101.0 mm
-Cast iron block
-Aluminum cylinder heads
-Intake valve diameter 55.13 mm
-Exhaust valve diameter 42.53 mm
-Lift (intake/exhaust) 13.67 mm / 15.26 mm
-Cam-in-block OHV design w/variable cam timing
-Forged steel crankshaft
-Cast Aluminum pistons
-430 HP at 5,500 rpm
-475 lb/ft of torque at 4,000 rpm
-10.5:1 compression
-Port fuel injection
-Firing order: 1-5-4-8-6-3-7-2
-Composite Intake manifold and 80 mm throttle body
-Left and Right exhaust manifolds
-8 quart aluminum oil pan/cooler
-Ignition coils and wires
-Production flex plate
-M-6038-73 shipping and storage cradle
-Factory lift brackets
-Bellhousing bolt pattern same as 4.6/5.4 and 5.0 Coyote
-Engine weight: 580 lbs.

Installation Note:
-For a 7.3L starter seeM-11000-SD73
-For FEAD kit seeM-8600-SD73
-For A/C add-on kit seeM-8600-SD73AC
-For control pack seeM-6017-73A
-For low profile intake seeM-9424-73LP

Note:

Proper break-in procedures should be taken when installation of new engines. Please refer to Ford Performance crate engine instruction guide.

Warranty:

See below for Ford Performance Crate Engine Limited Warranty information sheet.

Emissions Note:

This part is designed and intended for competition use only or off-highway use only. It should not be installed on a vehicle that is driven on public roads and highways. Installation of this part on a vehicle driven on public roads and highways is likely to violate U.S. and Canadian laws and regulations relating to motor vehicle emissions.

NPD Part Number : M-6007-73AT
Manufacturer Reference #'s: M-6007-73