Ford Performance 5.0L GEN 4 COYOTE ALUMINATOR SC CRATE ENGINE (M-6007-A50SCD)

FORD PERFORMANCE GEN 4 COYOTE 5.0L ALUMINATOR SC CRATE ENGINE, M-6007-A50SCD, 9.5 TO 1 COMPRESSION, MAHLE ANODIZED FORGED PISTIONS, MANLEY H-BEAM CONNECTING RODS, FORGED STEEL CRANKSHAFT, ALUMINUM BLOCK AND ALUMINUM HEADS, SEE ONLINE FOR MORE DETAILS

If you are looking for a all in one engine package for your Mustang or Ford vehicle then picking up one of these Ford Performance GEN 4 COYOTE ALUMINATOR Crate engines might be just what you are looking for. This engine features the Ford Performance part number M-6007-A50SCD and is designed to add power and performance to your Ford. This engine is designed to help save you money and time by putting the right parts together to ensure a long lasting engine.

*** All Ford Performance Engines are shipped via LTL truck freight with a preset charge. Free counter pick-up is available at any of our four locations. Counter-pick-up orders are not available online and will need to be placed over the phone. Please call your local NPD store for counter orders, time frames, and pick-up details. (Florida 1-800-874-7595), (North Carolina 1-800-368-6451), (Michigan 1-800-521-6104), (California 1-800-235-3445) ***

Manufacture Note:

Ford Performance has taken the Gen 4 Mustang GT 5.0L Coyote engine and created another in its series of "Aluminator" crate engines built to deliver higher performance. The 5.0 Aluminator SC is built with connecting rods and pistons designed specifically for high performance applications. Mahle9.5:1 compression ratio forged pistons are hard anodizedand featureGrafal low friction coating. The connecting rods are premium Manley H-beam with ARP 2000 bolts. The Gen 4 5.0L Aluminator SC is a direct bolt-in for the 2024 Mustang GT. Low compression for supercharged/turbocharged applications.

Engine Features and Options:
-Fits 2024+ Mustang GT
-5.0L (302 cubic inches)
-9.5:1 compression ratio (nominal)
-Mahle Hard Anodizedforged pistons with Grafal low friction coating
-Manley H-beam connecting rods with ARP 2000 bolts
-Forged steel crankshaft
-Uses production 2024 Mustang GT aluminum block
-2024+ Production oil pan
-Tuned composite Mustang GT intake manifold with production dual drive by wire 80 mm throttle bodies with variable runner control
-Four-valve-per-cylinder aluminum heads with roller-finger followers reduce friction.
-Mustang GT production camshafts
-Includes Ford Performance colder, heat range zero (0) spark plugs,M-12405-M50A
-Includes Ford Performance oil filter -M-6731-FL820
-Includes billet steel gerotor oil pump gearsM-6600-M50A

Installation Note:

Some or all of the following items may need to be changed from your original engine or modified for proper installation
-Vehicle harness and PCM not included
-Does not include alternator, for alternator kit seeM-8600-M50BALTorM-8600-M50ALTA
-Engine mount bosses and bell housing mount pattern common to 4.6L modular engines
-Does not include exhaust manifolds

Control Pack & Engine Harness
There is currently no information provided to NPD on control packs or engine wiring for the new GEN 4 Coyote motors at this time. We will update this information as soon as Ford Performance provides it to us. Please check back or call you local store location.

Exhaust Information:

NPD offers a wide variety of Coyote swap headers for your Fox or SN95 Mustang. See exhaust section or coyote swap section for these options.

Note:

Proper break-in procedures should be taken when installation of new engines. Please refer to Ford Performance crate engine instruction guide.

Warranty:

See below for Ford Performance Crate Engine Limited Warranty information sheet.

Emissions Note:

This part is designed and intended for competition use only or off-highway use only. It should not be installed on a vehicle that is driven on public roads and highways. Installation of this part on a vehicle driven on public roads and highways is likely to violate U.S. and Canadian laws and regulations relating to motor vehicle emissions.

NPD Part Number : M-6007-50DAS
Manufacturer Reference #'s: M-6007-A50SCD