Ford Performance 5.0L Coyote Cast Iron Race Block (M-6010-M50X)

FORD PERFORMANCE 5.0L CAST IRON COYOTE RACE BLOCK, BARE, M-6010-M50X, 5.6L MAXIMUM DISPLACEMENT, CLASS 50 GRADE IRON CASTING, LENGTHEND BORES FOR ADDED STRENGTH, DESIGNED FOR MAX EFFORT / BOOSTED COYOTE ENGINE BUILDS, SEE ONLINE FOR MORE DETAILS

If you are looking to start your Coyote engine build off in the right direction then picking up one of these bare blocks for your Mustang or Ford vehicle is just the place to start. This bare block features the Ford Performance part number M-6010-M50X and is designed to add power and performance to your Ford. This bare block is designed to get your engine build started off in the right direction. So, if you already have your heads, camshaft, rotating assembly and other components ready to go then look at picking up one of these bare blocks from NPD today!

*** All Ford Performance bare blocks are shipped via LTL truck freight with a preset charge. Free counter pick-up is available at any of our four locations. Counter-pick-up orders are not available online and will need to be placed over the phone. Please call your local NPD store for counter orders, time frames, and pick-up details. (Florida 1-800-874-7595), (North Carolina 1-800-368-6451), (Michigan 1-800-521-6104), (California 1-800-235-3445) ***

Manufacture Note:

Ford Performance cast iron version of the 2011-2017 Coyote engine block. Cast from a proprietary grade class 50 iron. Designed for extra strength for max-effort/boosted Coyote engine builds.

Engine Block Features and Options:
-Deck height: 227 mm (8.937")
-Finished bore: 92.2 mm (3.630")
-Maximum bore; 95.0 mm (3.740")

-Maximum stroke: 99 mm (3.897")-Maximum displacement: 5.6L
-Standard Coyote 100 mm bore spacing
-Lengthened bores for added strength
-Revised deck design for added strength around the water jackets
-Utilizes 12 mm head bolts
-Billet steel 6 bolt main caps with ARP hardware
-Accepts Gen 1 and Gen 2 Coyote 5.0L cylinder heads
-Accepts Gen 1, Gen 2, and Gen 3 GT350 5.2L cylinder heads
-Requires head gasket to match cylinder head
-Weight = 203# when finished to a 94mm bore
-Installation of 'O-ring' style head gaskets recommended for 95 mm bore applications
-Recommended forged steel
crankshaftsM-6303-M52BorM-6303-M52P

Emissions Note:

This part is designed and intended for competition use only or off-highway use only. It should not be installed on a vehicle that is driven on public roads and highways. Installation of this part on a vehicle driven on public roads and highways is likely to violate U.S. and Canadian laws and regulations relating to motor vehicle emissions.

NPD Part Number : M-6010-50CR
Manufacturer Reference #'s: M-6010-M50X