Ford Performance 363CI 500HP CRATE ENGINE-REAR SUMP (M-6007-Z2363RT)

FORD PERFORMANCE 363 CUBIC INCH 507 HP BOSS CRATE ENGINE-Z2 HEADS-REAR SUMP PAN, M-6007-Z2363RT, 10.2 TO 1 COMPRESSION RATIO, FORGED MAHLE PISTONS, SCAT FORGED STEEL CONNECTING RODS, BOSS 4 BOLT MAIN BLOCK, SCAT FORGED STEEL CRANKSHAFT, ALUMINUM CYLINDER HEADS, ROLLER ROCKERS, SEE ONLINE FOR MORE DETAILS

If you are looking for a all in one engine package for your Mustang or Ford vehicle then picking up one of these Ford Performance Crate engines might be just what you are looking for. This engine features the Ford Performance part number M-6007-Z2363RT and is designed to add power and performance to your Ford. This engine is designed to help save you money and time by putting the right parts together to ensure a long lasting engine.

*** All Ford Performance Engines are shipped via LTL truck freight with a preset charge. Free counter pick-up is available at any of our four locations. Counter-pick-up orders are not available online and will need to be placed over the phone. Please call your local NPD store for counter orders, time frames, and pick-up details. (Florida 1-800-874-7595), (North Carolina 1-800-368-6451), (Michigan 1-800-521-6104), (California 1-800-235-3445) ***

Manufacture Note:

507 HP on Pump Gas in a 302 Sized package, Built with the Best All New Parts, uses standard SBF Headers and accessory mounts, From the guys that know Ford Performance Best Ford Performance Engineers, 507 horsepower @ 6500 rpm, 450 lb. -ft. torque @ 5100 rpm

Ford Performance Z2 289/302/351W ALUMINUM HEAD WITH VELOCITY VANE

Specifications:
-20 degree inline valve angle
-Premium stainless steel valves - 2.05" intake - 1.60" exhaust
-PAC 1219X conical style valve springs with machined retainers and 10 machined valve locks. Most hydraulic cams can be used with these springs.
-Valve spring closed pressure - 145 lbs. @1.800"
-Valve spring open pressure - 358 lbs. @ 1.175"
-Coil Bind @1.100 0.650 Max Lift.
-Includes laser cut guide plates for use with 5/16" pushrods and 7/16" rocker studs
-Steel alloy intake and exhaust valve seats
-Manganese-bronze valve guides
-63cc combustion chamber
-Uses gasket style 14mm spark plugs

Engine Features and Options:
-Engine type: 302 based small block Ford
-Displacement (cu in): 363
-Bore x stroke (in): 4.125" bore x 3.400" stroke
-Block: Boss 302 8.2 deckM-6010-BOSS302
-Crankshaft: SCAT Forged Steel
-Connecting rods: SCAT forged steel I-beam connecting rods and ARP bolts
-Pistons: Forged Mahle w/ floating wrist pins
-Camshaft type: Hydraulic Roller
-Camshaft lift (in): .580"/.602"
-Camshaft duration (@.050 in): 232/240
-Cylinder Heads Ford Performance Aluminum "Z2" Cylinder HeadsM-6049-Z2
-Valve size (in): 2.05" intake 1.60" exhaust
-Valve Springs: PAC 1219X Ovate Beehive
-Compression ratio: 10.2:1 (nominal)
-Rocker arms: Roller Rockers 1.65:1 Ratio
-Vibration Damper: Ford Performance SFI Approved
-Valve covers: "Ford Racing" cast aluminum-black302-135 -Oil pan: high performance 7 quart capacity and windage tray / scraper
-Water pump: Edelbrock hi-performance
-Includes Ford PerformanceM-9439-A50intake manifold gaskets
-Does not include distributor, intake and flywheel
-Required fuel: Premium unleaded
-Built with current available parts. Photo and specs may vary.

Installation Note:

Results obtained using Edelbrock Super Victor Intake Manifold and 750 cfm carburetor. This combination does not fit all applications

Note:

Proper break-in procedures should be taken when installation of new engines. Please refer to Ford Performance crate engine instruction guide.

Warranty:

See below for Ford Performance Crate Engine Limited Warranty information sheet.

Emissions Note:

This part is designed and intended for competition use only or off-highway use only. It should not be installed on a vehicle that is driven on public roads and highways. Installation of this part on a vehicle driven on public roads and highways is likely to violate U.S. and Canadian laws and regulations relating to motor vehicle emissions.

NPD Part Number : M-6007-363BR
Manufacturer Reference #'s: M-6007-Z2363RT