Ford Front Lower Control Arm to K-Member Mounting Kit for (79-04)

MOUNTING KIT, FRONT LOWER CONTROL ARM TO K-MEMBER, INCL (4) FORD FRONT CONTROL ARM BOLTS, (4) FORD FRONT CONTROL ARM NUTS, THIS IS A COMPLETE SET OF ALL OEM FORD HARDWARE, OE CORRECT FOR 99-04 MUSTANGS,

If using Original Ford parts on your Foxbody or SN95 Mustang is what you are looking for? Then NPD has you covered with this front lower control arm mounting kit. This kit includes (4) original Hex head flange bolts with the correct 10.9 grade as factory as well as (4) nylon locking hex head flange nuts that are also the correct 10.9 grade hardware. Both the Bolts and the nuts in this kits are finished in a silver zinc finishes. So if your original hardware has seen better days, or you are missing the correct hardware to get you Mustang put back to factory. Look at picking up one of these kits from NPD today!

Please read notes below for a complete break down on this mounting kit.

Installation Note:

This mounting kit featuring all original Ford hardware and will work for all 1979 thru 2004 Mustangs. They are designed to be a directly replacement for all those year. See Restoration note below for a more in depth look at this kit.

Restoration Note:

This mounting kit for 1979 thru 1986 Foxbody Mustangs is labeled as a Ford replacement style hardware due to many differences from the original hardware used on those years. Foxbodys from 79 thru 86 did not feature hex head flange bolts or Nylon locking style hex head flange nuts. They used a standard hex head bolt with a top lock / distorted thread flange locking nuts. Also both the bolt and the nut featured a black phosphate finish.

This mounting kit for 1987 thru 98 Foxbody and SN95 Mustangs is labeled as a Ford replacement style hardware due to many differences from the original hardware used on those years. Mustangs from 87 thru 98 did feature hex head flange bolts but not in a silver finish. They also did not use Nylon locking style hex head flange nuts. The Nylon locking nuts were not introduced until 1999. They used top lock / distorted thread flange locking nuts. Also both the bolt and the nut featured a black phosphate finish. Note some 94-98 Mustangs did feature a top lock nut in a silver finish but most featured black phosphate.

This mounting kit for 1999 thru 2004 SN95 Mustangs is OE correct Ford style hardware for your Mustang. This kit features the correct hex head flange bolts in silver finish as well as the correct Nylon locking hex head flange nuts in silver finish that was started in 1999. This kit is the correct 10.9 grade that was used and will give your Mustang a OE or factory correct look!

Note:

If you are looking for front lower control are hardware without breaking the bank, NPD has you covered. See NPD part numbers M-3078-1BK (79-86 Style) / M-3078-4BK (87-98 Style) / M-3078-125BK (99-04 Style)

Ford Mustang Years:

1979, (79), 1980 (80), 1981 (81), 1982 (82), 1983 (83), 1984 (84), 1985 (85), 1986 (86), 1987 (87), 1988 (88), 1989 (89), 1990 (90), 1991 (91), 1992 (92), 1993 (93), 1994 (94), 1995 (95), 1996 (96), 1997 (97), 1998 (98), 1999 (99), 2000 (00), 2001 (01), 2002 (02), 2003 (03), 2004 (04)

NPD Part Number : M-3078-4AK
Manufacturer Reference #'s: M-3078-4AK