Manual Transmission Flywheel, SFI Billet Steel, 28 ounce, 157 tooth

Light weight billet steel is SFI 1.1, Fits 10 or 10.5 long style pressure plate or 10.5 diaphragm style pressure plate. Cuts down on rotating weight and improves drivability. Cutting a few pounds places this flywheel between a full weight steel flywheel and the ultra lightweight aluminum flywheels. Precision balanced and perfect surface grinding for optimum disc contact. 22 lbs. Note that some 5 or 6 spring clutch discs mat not clear the flywheel bolts. 10.5 inch Long style plates use 5/16 inch mounting bolts and 11 inch Long style plates use 5/16 inch or 3/8 inch inch mounting bolts, Diaphragm plates use Metric 8mm bolts.
The flywheel is the foundation of the clutch system, and because it is an energy storage device, also determines the amount of power available to launch the car. A heavy flywheel stores more energy as it spins than a light flywheel. If your engine and gearing combination requires more power or inertia to make the car launch without bogging the motor, you will want a heavier flywheel. Keep in mind, though, that a heavier flywheel will be slower to accelerate through the gears. A lighter flywheel creates less inertia at launch, but will accelerate quicker through the gears. In order to effectively use a lighter flywheel, you must consider the car weight, operating RPM of the engine, and most importantly, the gearing. Too little gear will cause the engine to nose over or bog on launch. RAM billet steel flywheels are recommended as a replacement for factory cast flywheels in high performance and racing vehicles. Cast flywheels are not explosion proof and can be dangerous when used in high performance applications at higher RPMs. RAM billet steel flywheels are CNC machined from certified materials and exceed SFI specifications. After machining, the flywheels are Blanchard ground parallel to the crankshaft mounting surface ensuring minimum runout and the optimum mating surface for the clutch disc. Use steel flywheels in heavier drag race cars or for the best drivability in street driven vehicles.

See 6379-1, 6379-1AK, T-6379-2A for crankshaft mounting hardware options. See 7563-1AK, 7563-1BK, F-7563-1K, F-7563-2K, M-7563-6FRK for pressure plate mounting options.

Ford Mustang and Shelby Years:
1965 (65), 1966 (66), 1967 (67), 1968 (68)
Above years shown are used for searches and are not application listings.

Mercury Cougar Years:
1967 (67), 1968 (68)
Above years shown are used for searches and are not application listings.

Ford Falcon and Ranchero Years:
1963 (63), 1964 (64), 1965 (65), 1966 (66), 1967 (67)
Above years shown are used for searches and are not application listings.

Ford Fairlane and Ranchero Years:
1964 (64)
Above years shown are used for searches and are not application listings.

Ford Truck F1, F2, F3, F100, F150, F250, F350, Expedition, Excursion, Lincoln Navigator and Blackwood Years:
1965 (65), 1966 (66), 1967 (67), 1968 (68), 1969 (69), 1970 (70), 1971 (71), 1972 (72), 1973 (73), 1974 (74), 1975 (75), 1976 (76), 1977 (77), 1978 (78), 1979 (79), 1980 (80)
Above years shown are used for searches and are not application listings.

Ford Bronco Years:
1966 (66), 1967 (67), 1968 (68), 1969 (69), 1970 (70), 1971 (71), 1972 (72), 1973 (73), 1974 (74), 1975 (75), 1976 (76), 1977 (77), 1978 (78), 1979 (79), 1980 (80)
Above years shown are used for searches and are not application listings.

Ford Mustang Fox Body, Capri, SN-95, S197, S550 Years:
1979 (79)
Above years shown are used for searches and are not application listings.

NPD Part Number : 6375-1L
Manufacturer Reference #'s: RAM 1527LW, C3AZ-6375-J