National Parts Depot
Search ...

FLYWHEEL, MANUAL TRANSMISSION


Full Description
FLYWHEEL, MANUAL TRANSMISSION
Item # 6375-1
MPN # 6375-1
Brand: RAM Clutches

$297.67
In Stock!




In Store Availability:
FL
NC
MI
CA
Description

FLYWHEEL, Manual Transmission, 28 ounce imbalance, 157 tooth, billet steel is SFI 1.1, fits 10 inch or 10.5 inch long style pressure plate or 10.5 inch diaphragm style pressure plate, 24 lbs, ** see also 6375-22 for aluminum **. See 6379-1, 6379-1AK, T-6379-2A for crankshaft mounting hardware options. 10.5 inch Long style plates use 5/16 inch mounting bolts and 11 inch Long style plates use 5/16 inch or 3/8 inch inch mounting bolts, Diaphragm plates use Metric 8mm bolts, See 7563-1AK, 7563-1BK, F-7563-1K, F-7563-2K, M-7563-6FRK for pressure plate mounting options, The flywheel is the foundation of the clutch system, and because it is an energy storage device, also determines the amount of power available to launch the car, A heavy flywheel stores more energy as it spins than a light flywheel. If your engine and gearing combination requires more power or inertia to make the car launch without bogging the motor, you will want a heavier flywheel, Keep in mind, though, that a heavier flywheel will be slower to accelerate through the gears, A lighter flywheel creates less inertia at launch, but will accelerate quicker through the gears, In order to effectively use a lighter flywheel, you must consider the car weight, operating RPM of the engine, and most importantly, the gearing, Too little gear will cause the engine to nose over or bog on launch, RAM billet steel flywheels are recommended as a replacement for factory cast flywheels in high performance and racing vehicles, Cast flywheels are not explosion proof and can be dangerous when used in high performance applications at higher RPMs. RAM billet steel flywheels are CNC machined from certified materials and exceed SFI specifications, After machining, the flywheels are Blanchard ground parallel to the crankshaft mounting surface ensuring minimum runout and the optimum mating surface for the clutch disc, Use steel flywheels in heavier drag race cars or for the best drivability in street driven vehicles,

NPD Part Number : 6375-1
Manufacturer Reference #'s: RAM 1527, C3AZ-6375-J

Vehicle Information

Year-Range (bold)      Model (bold)      Fits/Applications

1965-1968 MUSTANG 289, 302, 351C, 351W, M/T

1979-1979 MUSTANG 5.0L, M/T, USE WITH A 10.5 INCH DIAPHRAGM CLUTCH

1967-1968 COUGAR 289, M/T, W/ 10 INCH OR 10.5 INCH CLUTCH

1963-1967 FALCON 289, M/T

1964-1964 FAIRLANE 289-2V, M/T

1965-1980 F100-F350 302, 351, M/T

1966-1980 BRONCO 289, 302, 351, M/T

0-0 FORD ALL SMALL BLOCKS, WITH MATCHING BALANCE AND BELLHOUSING

WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Reviews

0 Reviews
 
Write a Review