FLOOR PAN, Toe Board, LH, 17 inch length x 24 inch width, 20 gauge, US / Canadian made Repro
1964-1972 CHEVELLE CHEVELLE, EL CAMINO AND MALIBU
1964-1972 TEMPEST GTO, LEMANS AND TEMPEST
1964-1972 CUTLASS CUTLASS AND F-85
1964-1972 SKYLARK INCL 64-69 SPECIAL
0-0 ** SHIPS UPS OVERSIZE **
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
The stamping of the floor pan section wasn't even close to the original. the front body mount is supposed to get spot welded to it once installed. I over layed the removed body mount to the pan and had gaps of 1 inch. I knew then I would need to cut it apart. I then cut the piece in half to replace what was damaged on my pan. I was forced to miter at the bend where the fire wall and floor meet at least an inch. To add insult to injury the flange that butts to the kick panel was bent upwards rather than down so it could be pinched between the firewall flange and the side cowl housing.. I welded a 16 gauge piece to this edge to make it work. Conclusion I used 8% of this panel and patched in the rest of what I needed to replace with my own fabrication. The depth of the stamped areas at the upper part that blends to the firewall was about 60% of the depth needed which explains why the body mount structure would not fit up.
Submitted on March 20, 2019 by Ed F.
Quality
Value
good quality and size it said it would be
Submitted on February 25, 2020 by george m.
YES I would recommend this product.
Quality
Value
best product for the price
Submitted on January 22, 2021 by charles s.
YES I would recommend this product.
Quality
Value
Appearance is great. Looks like it is factory made. Have not installed yet so I don't know how the fit is yet.
Submitted on January 31, 2021 by Dean R.
YES I would recommend this product.
Quality
Value
Great fit
Submitted on October 15, 2021 by Chris S.
YES I would recommend this product.
Quality
Value
Will not fit a 1966 Pontiac Tempest even though it says it will. None of the stampings in this product match the original flooring. Junk !!
Submitted on October 29, 2024 by Terry H.
Quality
Value
In Stock!
