This replacement style pad is die cu using modern materials with accessory access holes perforated for easy installation. Kit includes replacement style retainer pins.
See 377347-S2, 377347-SA, F-01691-1 for mounting hardware options.
Ford Mustang Years:
1965 (65), 1966 (66)
Above years shown are used for searches and are not application listings.
NPD Part Number : 01610-1A Manufacturer Reference #'s: M270, C4ZB-6501671-A, C5ZZ-6501671-A
1965-1966 MUSTANG
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Submitted on November 22, 2018 by Asim K.
YES I would recommend this product.
Quality
Value
this product was poor fit, did not have the upper heater hose hole not cut out and was missing the attaching hardware.
Submitted on January 13, 2019 by Terry T.
Quality
Value
poor fit, all holes not die cut and missing parts when received.
Submitted on January 17, 2019 by Terry T.
Quality
Value
The firewall pad was thicker than the ones for my floor. The heater hose cut out was wrong and I had to make an extra hole. Not a big deal. It will still be a while before I run the car, but excited to hear/feel noise and heat reduction do to the extra thickness! Very pleased with the purchase!
Submitted on December 08, 2020 by Keith A.
YES I would recommend this product.
Quality
Value
Good product
Submitted on December 31, 2020 by Mickey H.
YES I would recommend this product.
Quality
Value
Excellent quality. Fit the firewall of my 66 Mustang perfectly. I had to make "slits" between the outside and the holes for the steering column etc. due to these items were still installed in the vehicle. The plastic push pins were bigger than my original holes but I just drilled them out a bit. Everything was in the right place as far as cut outs and it was very thick with a nice rubber backer on it. Looks like it will last another 60 years. And doing items like this when you are replacing carpet, makes the car smell better as this material can absorb moisture and whatever else during the years.
Submitted on January 11, 2021 by Bryan B.
YES I would recommend this product.
Quality
Value
It's a good fit although I don't use the push in tabs I always glue mine on. All pre cut out matched up with throttle linkage hole and brake booster holes it's a good fit.
Submitted on September 05, 2021 by Miguel T.
YES I would recommend this product.
Quality
Value
The fit is very good. The quality of the material and construction is excellent. I installed it onto a new aftermarket firewall, and two of the holes for the pins that hold it to the firewall were just slightly off. No big deal. This pad is not a duplicate of the original, but as far as function, in my opinion it should do a better job than factory. Price is excellent also.
Submitted on January 24, 2022 by Greg W.
YES I would recommend this product.
Quality
Value
Worked fine
Submitted on April 19, 2022 by Ralph B.
YES I would recommend this product.
Quality
Value
In Stock!