FENDER APRON, Inner Rear, RH, Canadian made, .035 inch thick steel or 21 gauge, These panels do not have the holes punched on the upper flange for the fender retainer U-nuts, See 127-2RH for upper extension to cowl, Note: While these panels are made in Canada and at one time part of the Paddock/American-Designers tooling, the quality of the parts have degraded over time to a point where we have a strong preference towards their imported counterpart,
NPD Part Number : 127-1RH Manufacturer Reference #'s: M127R, C5ZZ-16A018-A
1965-1966 MUSTANG RH
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
My main issue with this is the lack of any cut outs on the top for the fender bolts. The shape is good, and the metal is heavy, but there is a lot of cutout work that will need to be done before it can be used. You will also need a good template for it to be usable. I recommend looking for something more complete. If they would just cut those holes, this would be a good part, particularly for the price.
Submitted on August 02, 2018 by Brad A.
Quality
Value
Overall, it will work for the intended use but it’s not great. The metal is thick and it is mostly the right shape but it could be much better. The piece was cut with a plasma cutter and there is some slag left on the edges. The top rail was not flat so I had to bend it into shape. The rope rails also does not have the final 90 degree bend like the stock fender- it just ends with the slaggy sharp edge. It also does not have the top rail holes but that was expected because it is in the description.
Submitted on March 08, 2022 by Damon K.
Quality
Value
In Stock!
