FAN SHROUD, Radiator, 20 inch, original Ford tooling, Made from stronger material than the original, See 8146-2AK, 8146-2K for mounting kit options,
NPD Part Number : 8146-4 Manufacturer Reference #'s: C9ZZ-8146, C7ZZ-8146-B, C9ZZ-8146-B
1967-1967 MUSTANG 289 HIPO
1967-1967 MUSTANG 289, W/ A/C
1968-1968 MUSTANG 289, 302, W/ 20 INCH RADIATOR, ** PROBABLY CORRECT **
1969-1969 MUSTANG 302, 351W, 20 INCH RADIATOR
1967-1967 COUGAR 289, W/ A/C
1969-1969 COUGAR 351, W/ STANDARD COOLING
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
this fan shroud fits great ! and keeps my pony cool now
Submitted on July 09, 2018 by wesley h.
YES I would recommend this product.
did not fit my 1967 mustang 289 engine. I had to cut part off the top piece , so the fan blades would not hit and I cut the bottom too, so the blades would not hit
Submitted on October 12, 2018 by richard d.
Quality
Value
Fast shipping & fit very well.
Submitted on February 23, 2019 by Richard S.
YES I would recommend this product.
Quality
Value
Perfect fit for 1967 Cougar 20" radiator.
Submitted on December 05, 2020 by John H.
YES I would recommend this product.
Quality
Value
Did not fit. On wall of garage
Submitted on April 07, 2021 by Curt M.
Quality
Value
Poor quality. During install, the top split (cracked) with just a little flexing while moving it into position. Material is a thin plastic and in no way what I expected from NPD. I will be reaching out for refund
Submitted on April 23, 2021 by jeff s.
Quality
Value
Fit perfectly 22 inch stock radiator.
Submitted on June 24, 2021 by Gary Z.
YES I would recommend this product.
Quality
Value
Had to do some slight trimming for clearance at the upper hose but besides that it was great
Submitted on August 03, 2021 by William M.
YES I would recommend this product.
Quality
Value
Product fit perfect, great quality!
Submitted on August 09, 2021 by Dennis K.
Quality
Value
perfect fit
Submitted on September 27, 2021 by Gregory B.
Quality
Value
I had to trim the bolt holes so that it would fit where the fan blade would not hit on the sides, but the bottom of the shroud will still need trimming because the fan is hitting it because it can not down to clear the fan.
Submitted on October 22, 2021 by MICHAEL F.
YES I would recommend this product.
Quality
Value
Fits well on my 67, 20" radiator and I have the fan w/clutch. It rubbed at first, but I had enough adjustment by loosening the radiator bolts and lifting it as far as the bolts would allow and doing the same for the shroud and it works.
Submitted on February 02, 2022 by David K.
YES I would recommend this product.
Quality
Value
Fit perfectly with no rework!
Submitted on March 08, 2022 by Bob O.
YES I would recommend this product.
Quality
Value
good price fits perfect
Submitted on April 09, 2022 by DEVRON K.
YES I would recommend this product.
Quality
Value
I bought this because it was recommended on other sites. It was a good quality mold and rigid enough. I thought they could have done a better job with the hose cutouts. They were very rough and had to be cleaned up with a dremel. I used it on a 66 Fairlane with a champion radiator and 17 inch fan. I would recommend to a friend….. They are better off not cutting the upper hose area and leave it to the customer if it was needed.
Submitted on April 12, 2022 by Wayne L.
YES I would recommend this product.
Quality
Value
Perfect fit
Submitted on April 16, 2022 by Bob N.
YES I would recommend this product.
Quality
Value
Easy to install and perfect fit.
Submitted on May 14, 2022 by Robert B.
YES I would recommend this product.
Quality
Value
Good quality and exact fit for a 69 Mach 1 w/ a 351W, 17" fan, and 20" radiator.
Submitted on July 30, 2022 by Brent K.
YES I would recommend this product.
Quality
Value
Perfect fit great quality
Submitted on January 07, 2023 by Mike H.
YES I would recommend this product.
Quality
Value
Very nice part, fit well. Would buy again.
Submitted on February 25, 2023 by BRYAN J.
YES I would recommend this product.
Quality
Value
Fit great. 302 with 2-row SD radiator.
Submitted on May 29, 2023 by Brandon S.
YES I would recommend this product.
Quality
Value
The shroud fit my car, but one blade of the fan made contact at the top of the shroud near the upper radiator hose. I used a Dremel to cut out a tiny piece of the shroud and problem solved. I'm glad I spun the fan by hand to test it before installing the belts, etc.
Submitted on June 13, 2023 by Lester M.
YES I would recommend this product.
Quality
Value
worked great on my 20" 1968 mustang!
Submitted on October 08, 2023 by Dave P.
YES I would recommend this product.
Quality
Value
Submitted on May 06, 2024 by joe a.
YES I would recommend this product.
Quality
Value
In Stock!
