INTAKE MANIFOLD, EDELBROCK, PERFORMER RPM II, BLACK POWDER COATED, INCL UPPER AND LOWER MANIFOLD, PLENUM ACCESS COVER, UPPER AND LOWER INTAKE GASKETS, VACUUM LINE, PCV BAFFLE PLATE, VACUUM TREE, ALL REQUIRED MOUNTING HARDWARE AND FITTINGS, INSTALLATION INSTRUCTIONS, DESIGNED TO INCREASE HORSEPOWER AND TORQUE OVER STOCK INTAKE
If you are looking to not only increase performance but also increase the overall look of your engine compartment, look at picking up one of these Edelbrock Performance RPM II Intake Manifolds from NPD. Edelbrock part #71233 (M-9434-25EPB) Performer 5.0 RPM II intake manifold for 1986-95 5.0L Mustang engines has shown significant gains in horsepower over existing designs in the 1500 to 6500 rpm range, and is ideally suited for street and strip applications. This unit is Black Powder Coated to ensure a long lasting finish. This manifold consists of a V-shaped crossover with an increasing cross-sectional area, which passes over to eight large tapered runners. This unit features a 70mm throttle body opening (75mm will require port matching). 1994-95 Mustang engines require Throttle Body Adapter #38353 (M-9A424-25EPB) and Adapter Kit #8025 (M-9D477-25EP). May not fit with stock hood of 1994-95 Mustangs, aftermarket hood recommended. So if you are looking to bring your 5.0L Mustang into the 21st century look at picking up one of these intakes from NPD today!
Manufacture Note:
These Performer RPM II EFI manifolds are designed for 1986-1995 5.0L-based Mustangs and passenger vehicles (will not fit trucks). They are ideally suited to street/strip applications with an RPM range of 1500-6500 RPM. The manifold features a V-shaped crossover with an increasing cross-sectional area leading to large, tapered runners. Manifold may not clear factory hood of 1994-1995 Mustang. Use of an aftermarket hood is recommended. Manifold WILL NOT clear factory 1994-1995 Mustang strut tower brace; Use QA1 or BBK Strut Tower Brace is recommend.
Manufacture Installation Note:
Recommended intake gasket: Edelbrock #7220 (M-9439-25EP); Air valve location is 0.30" higher and 0.50" forward from stock; Port exit dimensions: 1.16" x 2.0"; Recommended cams: Ford SVO X-303 or Z-303.; Overall height: 11.13"; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Installation Note:
See NPD part number M-9424-25EPK for correct Edelbrock mounting hardware. If you are looking to upgrade your hardware or are looking for matching black mounting hardware NPD offers a full line of ARP hardware to properly mount your lower intake manifold.
Additional Emissions Information:
This part is NOT C.A.R.B Approved and cannot be installed for use on any emission controlled vehicle in California. It cannot be sold or shipped to any California resident or addressee and is intended to be use for Off-Road use only!
Ford Mustang Years:
1986 (86), 1987 (87), 1988 (88), 1989 (89), 1990 (90), 1991 (91), 1992 (92), 1993 (93), 1994 (94), 1995 (95)
NPD Part Number : M-9424-25EPB Manufacturer Reference #'s: 71233
1986-1993 MUSTANG 5.0L
1994-1995 MUSTANG 5.0L
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
This item is a "made to order" product and will ship directly from the manufacturer.
Please allow 1-8 weeks for delivery.
Please note that some manufacturers have longer lead times.