National Parts Depot
Search ...

Easy Performance Sequential LED Taillight Kit for 87-93 Mustang LX


Full Description
Item # M-13465-87EYLK
MPN # M-13465-87EYLK
Brand: Easy Performance Products

$454.41
Out of Stock




In Store Availability:
FL
NC
MI
CA
Description

LED TAIL LIGHT CONVERSION KIT, SEQUENTIAL, INCL (12) LED PANELS, DESIGNED TO INCL TURN SIGNAL, BRAKE LIGHT, RUNNING LIGHT, BACK UP LIGHT AND EMERGENCY FLASHER FUNCTIONS, FLASHER INCLUDED, 11 SEQUENTIAL PATTERNS

The Classic Sequential Tail Light (CST) kits from Easy Performance are direct retrofit and replacement for incandescent light bulbs in Foxbody Mustang. These kits incorporate high efficiency LED lights that increase tail light brightness, reliability and longevity. The kits replace all the functionality of the light bulbs they replace. This includes low level running light illumination, brake light illumination, turn signal illumination, emergency flash and back-up lighting where applicable. In addition, the kit includes a self-contained microprocessor and circuitry to enable a multitude of sequential lighting patterns. There is no separate sequential lighting control module to mount and wire up. The kit is designed to work with OEM tail light housing and lenses as well as aftermarket components. For LED lighting to function properly, vehicles that have a 2 prong OEM type turn signal flasher, a Low Current Flasher Module must be installed in place of the traditional turn signal flasher module. Vehicles originally equiped with a 3 prong OEM type turn signal flasher will likely function properly. This kit from NPD includes the proper flasher module to make installation as easy as possible. No needing to buy extra parts or components. So if you are looking for one of the best kits on the market look at picking up one of the Easy Performance LED kits from NPD today!

Manufacture Note:

The simple installation requires a quick mounting of the LED lighting panel to the tail light housing or lens, depending on application and plugging in the wired bulb plug(s) into the factory bulb socket(s). If sequential lighting patterns are desired, then the attached pink wire must be wired to +12 volt ignition power.

A pushbutton switch on the back or front of the light panel is used to select from any of the pre-programmed sequential patterns. Each press of the switch steps panel through each of the available patterns. Selection is performed while panel is powered up so user can observe each pattern until the desired pattern is determined. The selection is stored in memory within the onboard controller so every time vehicle is started, the same pattern is used.

When ignition power is Off, the tail light panels do not draw any power from the vehicle. This eliminates unnecessary current draw on the battery that can lead to a dead battery over time. The exclusive design also allows the tail light panel to perform running light, brake light and emergency flasher functions when the vehicle is not running. This allows running illumination and warning flashers when the key is out of the ignition. Ignition must be On to provide sequential flashing.

Each CST kit is uniquely engineered for each application. Unlike many aftermarket LED panels, our panels are specifically designed to utilize all available lighting area available in the tail light lenses. The panels will often light up areas that the OEM lighting does not illuminate. This provides the vehicle with the absolute brightest and most noticeable tail light function. In addition, the kits are specifically engineered to not compromise the waterproof sealing of the tail light housings. This eliminates the chance of water intrusion which can lead to condensation, fogging and corrosion within the tail light housings. Many aftermarket kits can not make this claim.

Note:

This tail light kit is configured with 3156 / 3157 type bulb bases in the Brake light and Back Up light positions and a 1156 type bulb base in the Turn Signal light position. This enables simple plug-n-play signal connections. Please contact us if you require a different bulb base configuration.

Ford Mustang Years:

1987 (87), 1988 (88), 1989 (89), 1990 (90), 1991 (91), 1992 (92), 1993 (93)

NPD Part Number : M-13465-87EYLK
Manufacturer Reference #'s: 87-93 LX-FM

Vehicle Information

Year-Range (bold)      Model (bold)      Fits/Applications

1987-1993 MUSTANG LX

0-0 SEE M-13465-87EYGK FOR CORRECT 87-93 GT STYLE

WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Reviews

0 Reviews
 
Write a Review