Includes 7mm bleeder screw. Replacement. Each.
1/4” drum brake bleeder screws were factory standard until sometime in 1972 when the change was made to the 3/8” bleeders probably due to the propensity of the 1/4” bleeders to break off if slightly corroded. All factory drum bleeders from 1972 on were 3/8” including all bleeders found on replacement wheel cylinders produced after that date for the earlier cylinders. Verify your bleeder size before ordering. Concours rules require the use of 1/4” bleeders on all 1972 and prior vehicles with drum brakes.
See 2061-1AK for mounting kit.
Ford Mustang Years:
1965 (65), 1966 (66), 1967 (67), 1968 (68), 1969 (69), 1970 (70), 1971 (71), 1972 (72), 1973 (73)
Above years shown are used for searches and are not application listings.
Mercury Cougar Years:
1967 (67), 1968 (68), 1969 (69), 1970 (70), 1971 (71), 1972 (72), 1973 (73)
Above years shown are used for searches and are not application listings.
Ford Falcon and Ranchero Years:
1962 (62), 1963 (63), 1964 (64), 1965 (65), 1966 (66), 1967 (67), 1968 (68), 1969 (69), 1970 (70)
Above years shown are used for searches and are not application listings.
Ford Fairlane and Ranchero Years:
1964 (64), 1965 (65), 1966 (66), 1967 (67), 1968 (68), 1969 (69), 1970 (70)
Above years shown are used for searches and are not application listings.
Ford Torino and Ranchero Years:
1968 (68), 1969 (69), 1970 (70), 1971 (71)
Above years shown are used for searches and are not application listings.
NPD Part Number : 2061-1 Manufacturer Reference #'s: 134.61017, C3OZ-2061-B, D2ZZ-2061-A
1965-1973 MUSTANG 250, 260, 289, 302, 351W
1970-1970 MUSTANG 351C, 428
1967-1967 COUGAR FRONT, 289
1968-1968 COUGAR FRONT, 289, 302
1970-1970 COUGAR FRONT, 351C, 351W, 428
1971-1972 COUGAR
1973-1973 COUGAR FRONT, RH
1962-1964 FALCON 10 INCH BRAKE
1965-1970 FALCON (BEFORE 1/1/70), 10 INCH X 2 1/4 INCH BRAKE
1970-1971 TORINO 10 INCH X 2 1/2 INCH BRAKE
1970-1970 FALCON (FROM 1/1/70), 10 INCH X 2 1/4 INCH BRAKE
1970-1970 FALCON (FROM 1/1/70), 10 INCH X 2 1/2 INCH BRAKE
1968-1971 TORINO 10 INCH X 2 1/4 INCH BRAKE
1964-1970 FAIRLANE 10 INCH X 2 1/4 INCH BRAKE
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Wrong wheel cylinder in the right box couldn't get the speed bleeder to fit, no copper washer, bought a cylinder locally so I could get the job done.
Submitted on January 30, 2021 by Bob M.
Quality
Value
I ordered the left and right front cylinders. The left side bleed fitting used a 7mm and the right side 5/16". They should be the same!
Submitted on July 29, 2021 by Jim M.
YES I would recommend this product.
The Centric info we have found showed these as having ¼”
bleeders. We just went through ALL our Mustang front and rear wheel
cylinders and a few have ¼” or 3/8” fittings and all the rest have 7mm or even
a couple are 10mm. So apparently Centric is using a "mixed bag" approach with bleeders.
Quality
Value
Works as expected, Bleeder should not be metric
Submitted on August 05, 2022 by Tom S.
YES I would recommend this product.
Quality
Value
In Stock!
