Oversize bushings for use with worn or oblong pin holes. Does one hinge and includes pin and 2 pin bushings. Trim 3 long pin as required. Requires 15/32 drill bit capable of drilling cast iron. A Carbide or Cobalt bit is suggested.
Ford Mustang Years:
1965 (65), 1966 (66), 1967 (67), 1968 (68),
Above years shown are used for searches and are not application listings.
Mercury Cougar Years:
1967 (67), 1968 (68)
Above years shown are used for searches and are not application listings.
Ford Falcon and Ranchero Years:
1960 (60), 1961 (61), 1962 (62), 1963 (63), 1964 (64), 1965 (65), 1966 (66), 1967 (67), 1968 (68), 1969 (69), 1970 (70)
Above years shown are used for searches and are not application listings.
Ford Fairlane and Ranchero Years:
1964 (64), 1965 (65), 1966 (66), 1967 (67), 1968 (68), 1969 (69), 1970 (70)
Above years shown are used for searches and are not application listings.
Ford Torino and Ranchero Years:
1968 (68), 1969 (69), 1970 (70), 1971 (71)
Above years shown are used for searches and are not application listings.
NPD Part Number : 22811-3K Manufacturer Reference #'s: National Parts Depot 22811-3K,
1965-1968 MUSTANG
1967-1968 COUGAR
1960-1970 FALCON (BEFORE 1/1/70)
1970-1970 FALCON (FROM 1/1/70)
1968-1971 TORINO
1964-1970 FAIRLANE
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Just what I needed for the oblong drivers side hinge. Installed nice and snug.
Submitted on November 25, 2018 by Jeff F.
YES I would recommend this product.
Quality
Value
Made hinges tighter than regular rebuild kit I had used. I like the heavier bushings that will handle the door load better than the standard.
Submitted on May 07, 2019 by Robert R.
YES I would recommend this product.
Quality
Value
Submitted on March 30, 2020 by Mike b.
YES I would recommend this product.
Quality
Value
Kit was well packaged. Instructions call for 15/64 drill bit but this size is too small and the bushings crack when pressed in. I increased to 16/64 and bushing fit perfectly.
Submitted on March 31, 2023 by travis j.
YES I would recommend this product.
Quality
Value
In Stock!