Fully lit needles, backlit faces, and highly visible LCD message centers are a few of the things that you can see which set the VHX Series apart from yesterdays traditional approach to instrumentation. A few of the features which you dont normally see are the micro-controlled precision stepper motors, solid state sensors for unparalleled accuracy, and user-customizable display feedback, all supported by an unrivaled limited lifetime warranty which has become the standard for Dakota Digital instrumentation systems.
* Bezel not included.
Analog Gauges:
Speedometer 0 -120 MPH (optional metric version 0- 195 kmh)
Tachometer 0- 8,000 RPM
Oil Pressure 0- 80 psi
Water Temperature100- 260F (optional metric version 40- 120C)
Fuel LevelE, 1/4, 1/2, 3/4, F
Voltmeter9- 17 VDC
Lighting:Back lit technology is popular with performance instrumentation due to precise lighting allowing you see what is truly important when you really need it at a quick glance. Each number, tick mark, annunciator, needle, indicator and digital message center is lit by a series of LEDs behind the gauge face.
Digital Message Centers:
Standard Displays:
Odometer (One time user settable, Million Mile)
Dual (A/B) Trip Meter (0- 9,999.9)
Clock (12 hour)
Performance Meters:
0- 60 MPH Timer (0- 100 kmh)
1/4 mile time
1/4 mile end speed (trap speed)
High speed recall
High RPM recall
Gauges:Speedometer (0- 255 MPH/kmh)
Tachometer (0- 9,900 RPM)
Oil Pressure (0-100 psi displayed in 1 psi increments)
Water Temperature (100- 300F/ 40- 150C displayed in 1 F/C increments)
Voltmeter (9- 17 VDC)
Fuel Level (0-99% full)
Lighting:Auto-contrasting LCD display for optimal view in the brightest of sunlight.LED backlit at night to match/ complete the look at night.
Built-in Indicators:
Turn Signals (Left/ Right)
High Beam
Check Engine
Parking Brake
Cruise Control (On/ On & Engaged when vehicle is equipped)
Gear Position (OptionalGSS-3000sensor required)
4 x 4 (When vehicle is equipped)
Wait to Start (When vehicle is equipped)
**Not all OEM indicator lamp functions will be replaced.
If additional indicators are desired within the new instrument system, consider repurposing any unused indicators to suit your application.
Included Sensors:
Water Temperature- 1/8" NPT, ground isolated sensor with a 10 ft harness.
Oil Pressure- 1/8" NPT solid state sensor with a 10 ft harness.
Cable Driven Speed Sensor/ Generator:Replaces Ford and/ or GMstyle speedometer cables with a 10 ft harness. Sensor requires approximately 5" clearance extending between the cable drive output and any obstruction. Part #130011(sold separately) allows for relocation of the pulse generator when additional clearance is required.
Bushings:Each kit comes with 1/8" to 1/4", 3/8" and 1/2" NPT bushings along with bushings for 12mm and 16mm x 1.5 threads.
Calibration: Pushbutton:
Dakota Digital instruments are programmed and operated by the push of a button. Simply mount the included pushbuttons supplied with your gauges in a convenient and easily accessible location. These buttons are used to calibrate your speedometer, set the cylinder count and the fuel level gauge. Once properly configured these same buttons are used to access the wealth of information located in the Digital Message Centers.
* Ships from manufacturer, Allow a minimum of 1-8 weeks for delivery, Currently, however, some manufacturers are requiring much longer lead times, *
Ford Mustang and Shelby Years:
1965 (65), 1966 (66)
Above years shown are used for searches and are not application listings.
NPD Part Number : 10848-12GE Manufacturer Reference #'s: Dakota Digital VHX-65F-MUS-S-W,
1965-1965 MUSTANG DELUXE INTERIOR OR GT
1966-1966 MUSTANG
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
This item is a "made to order" product and will ship directly from the manufacturer.
Please allow 1-8 weeks for delivery.
Please note that some manufacturers have longer lead times.