Dakota Digital Series III instrument systems offer the latest technologies and features for your custom vehicle. High brightness vacuum fluorescent displays provide a lifetime of trouble free use while offering increased accuracy and features!* Clock not available for OEM dasheswith Center Console Gauges.
**Bezelis notincluded, you mustuse your stock gauge bezel.
Digital Gauges:
Speedometer0 -255 MPH (optional metric version 0- 255 km/h)
Tachometer0- 17,500 RPM
Oil Pressure0- 99 psi
Water Temperature0- 300F (optional metric version 0- 150C)
Fuel Level0- 99%
Voltmeter8- 17 VDC
Standard ColorsBlue or Teal
Digital Message Centers:
Standard Displays:
Odometer (One time user settable,Million Mile)
Dual (A/B) Trip Meter (0- 9,999.9)
Performance Meters:
0- 60 MPH Timer (0- 100 kmh)
1/4 mile time
1/4 mile end speed (trap speed)
High speed recall
High RPM recall
Gauges:
Speedometer (0- 255 MPH/kmh) opposite scale of main speedometer.
Built-in Indicators:
Turn Signals (Left/ Right)
High Beam
Check Engine
Parking Brake
Cruise Control (On/ On & Engaged when vehicle is equipped)
Gear Position (OptionalGSS-3000sensor required)
4 x 4 (When vehicle is equipped)
Wait to Start (When vehicle is equipped)
**Not all OEM indicator lamp functions will be replaced.
If additional indicators are desired within the new instrument system, consider repurposing any unused indicators to suit your application.
Included Sensors:
Water Temperature-1/8" NPT, ground isolated sensor with a10 ftharness.
Oil Pressure-1/8" NPT solid state sensor with a 10 ft harness.
Cable Driven Speed Sensor/ Generator-Replaces Ford and/ or GMstyle speedometer cables with a 10 ft harness. Sensor requires approximately 5" clearance extending between the cable drive output and any obstruction. Part #130011(sold separately) allows for relocation of the pulse generator when additional clearance is required.
Bushings: Each kit comes with 1/8" to1/4", 3/8" and 1/2" NPT bushingsalong with bushings for12mm and 16mmx 1.5 threads.
Calibration:
Push button-Dakota Digitalinstrumentsare programmed and operated by the push of a button. Simply mount the included push buttonssupplied with yourgaugesina convenientand easily accessible location. These buttons are used to calibrate your speedometer, set the cylinder count andthefuel levelgauge. Once properly configuredthese same buttons are used to access the wealth of informationlocated in the Digital Message Centers.
Ford Mustang and Shelby Years:
1971 (71), 1972 (72), 1973 (73)
Above years shown are used for searches and are not application listings.
NPD Part Number : 10848-10B Manufacturer Reference #'s: Dakota Digital VFD3-71M-CNTR-Z,
1971-1973 MUSTANG USE WITH CENTER DASH GAUGE PACKAGE
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
In Stock!
