CYLINDER HOSES, Power Steering, concours repro, control valve to cylinder, pair, zinc dichromate fittings and lines, single crimp fittingsNotes: 1)You must flush the PS system anytime components are replaced to eliminate any contamination and to validate manufacturers warranties.2)We highly recommend to use of Motorcraft type *F* (19582-2) transmission fluid in the Ford P/S system for proper operation and longer life of the components.
NPD Part Number : 3A714-22 Manufacturer Reference #'s: MCH002, C6OZ-3A714-A, C6OZ-3A717-A
1967-1970 MUSTANG
1967-1967 COUGAR 289
1967-1967 COUGAR 390
1968-1968 COUGAR 289, 302
1968-1968 COUGAR 390
1968-1968 COUGAR 427, W/ A/C
1968-1968 COUGAR 427, W/O A/C
1969-1969 COUGAR 351W
1969-1969 COUGAR 390, 428 CJ
1969-1970 COUGAR ELIMINATOR, BOSS 302, W/ OIL COOLER
1970-1970 COUGAR 351C, 351W
1970-1970 COUGAR 428
1966-1970 FALCON (BEFORE 1/1/70)
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Submitted on October 09, 2018 by Chad L.
YES I would recommend this product.
Quality
Value
The hoses look good and work perfect, but they are not truely Concours. Factory hoses have a pain dual at one ent to show the proper direction for install. These hoses didn’t have the paint adding some confusion to the install and making them not concours. Instruction to show te correct direction of install would e helpfully as well.
Submitted on November 16, 2018 by David C.
YES I would recommend this product.
Hello David,
Technically, paint daubs/markings are not required in MCA Concours judging. There's a myriad of reasons for this, prime among them being variations between plants and shifts and workers regarding the style and details and colors of markings... This gets further muddied and muddled by restorers who have unwisely copied markings from other incorrectly-done restored cars, which over the years, has snowballed into an absolute mess. This is not to say that a quality and detail-oriented restorer shouldn't do their best to research and replicate factory markings on their restoration (either by documenting on original parts as they're removed from their car, or researching other original cars from the same assembly plant). But it IS to say that it would not be wise for our concours hose supplier to apply those markings for you. There is no definitive way to do that, where it would be accurate and advisable in all cases. And as I said previously, it is not required within concours judging rules. We VERY MUCH appreciate the input, and I simply wished to explain our motives here. Thanks!
Rick
NPD
Quality
Value
perfect fit
Submitted on April 12, 2019 by Boye S.
Quality
Value
I purchased these power steering hoses to replace the exact same set purchased less than 3 years ago (less than 500 miles ago) from NPD by the previous owner of my car (I have the receipts). The previous set had the crimp on the connector fail, the hose just pulled out from the connector. Hopefully there's not an on-going quality control problem. New ones are ok so far after a short test drive and connectors seem firmly attached. We'll have to see if they last. I'll send can send the replaced hose for your inspection if you want.
Submitted on August 24, 2019 by Scott C.
Quality
Value
Quality product
Submitted on October 07, 2019 by Ken B.
YES I would recommend this product.
Quality
Value
I made the mistake of initially saving a few dollars and purchased the NPD replacement P/S valve hoses (3A714-2A) for my 69 Mach 1. They didn’t fit correctly! I then purchased the “good repro” (3A714-22). Much better fit! Do yourself and your restoration right, buy the correct fitting parts! Greg M
Submitted on April 26, 2020 by Greg M.
YES I would recommend this product.
Quality
Value
Just like original hoses. Perfect fit.
Submitted on April 26, 2020 by david n.
YES I would recommend this product.
Quality
Value
They both fit my 67 cougar
Submitted on June 04, 2020 by Vernon R.
Quality
Value
perfect fit for this car, 67 cougar.
Submitted on June 05, 2020 by Vernon R.
YES I would recommend this product.
Quality
Value
Hoses were a horribly tight fit, I had to loosen the the ram to install them. I got 4 miles on the car after the install and the crimp on one of the hoses failed. These parts are junk.
Submitted on June 12, 2020 by Geoff E.
Quality
Value
Great repro and value of power steering hose pair!
Submitted on October 29, 2020 by Robert B.
YES I would recommend this product.
Quality
Value
Having used a different manufacturer who employed a double crimp these hoses were easier to install due to the narrower shoulder if the crimp, also the other manufacturers hoses failed because of a lower quality metal used on the the flare which failed to seal no matter how much it was tightened. While the jury is out on the longevity of the flare seal, I feel it’s a higher quality product.
Submitted on November 13, 2020 by William D.
YES I would recommend this product.
Quality
Value
They shipped fast, fit perfectly and fixed my leak. Thank you definitely recommend
Submitted on January 07, 2021 by Mathew F.
YES I would recommend this product.
Quality
Value
Excellent
Submitted on May 21, 2021 by Phil M.
YES I would recommend this product.
Quality
Value
Submitted on September 12, 2021 by Donald C.
YES I would recommend this product.
Quality
Value
These concours correct hoses have eliminated decades of problems from incorrect fitment. I no longer feel the need to convert to rack and pinion!
Submitted on November 09, 2021 by michael m.
YES I would recommend this product.
Quality
Value
Works awesome as advertised
Submitted on October 28, 2022 by Doug I.
YES I would recommend this product.
Quality
Value
These are the RIGHT hoses for my '67 Mercury Cougar power steering cylinder! Thanks to NPD
Submitted on May 13, 2023 by Willard L.
YES I would recommend this product.
Quality
Value
Submitted on September 07, 2023 by Stephen D.
YES I would recommend this product.
Quality
Value
NICE RERODUCTION. WORKED REALLY WELL.
Submitted on November 09, 2023 by Barron F.
YES I would recommend this product.
Quality
Value
Submitted on April 02, 2024 by Kevin W.
YES I would recommend this product.
Quality
Value
Submitted on November 26, 2024 by Robert R.
YES I would recommend this product.
Quality
Value
In Stock!
