CRUSH NUT, Round Head Rivet Style, Power steering bracket to frame, 3/8 inch-16, stamped steel, zinc, See also T-3A351-1 for good repro and 3A351-1K for installation tools
NPD Part Number : 375474-S8 Manufacturer Reference #'s: AMK Products B-12931-100, 375474-S8
1965-1970 MUSTANG P/S, 2 REQD
1967-1970 COUGAR P/S, 2 REQD
1955-1957 TBIRD P/S, 1 REQD
1960-1970 FALCON (BEFORE 1/1/70)
1964-1971 FAIRLANE FAIRLANE, TORINO, 70 1/2 FALCON
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Submitted on October 02, 2018 by Ceotis D.
Quality
Value
Excellent product worked great on my 66 convertible mustang.
Submitted on October 13, 2018 by Phillip C.
YES I would recommend this product.
Quality
Value
Worked perfectly.
Submitted on July 30, 2020 by KEVIN W.
Quality
Value
Worked like a champ....
Submitted on July 11, 2021 by Loyd C.
YES I would recommend this product.
Quality
Value
Submitted on November 30, 2021 by JERRY D.
Quality
Value
Worked and fit like the original. Aoid the completely round version as they tend to spin inside the frame and do not fit right. These hex styles are just like Factory.
Submitted on June 15, 2022 by Eric k.
YES I would recommend this product.
Quality
Value
Installation of the inserts can be a challenge. I tried using the extra cost installation tool, but found this required A LOT of torque even with grease on the threads, and I working under the car on a lift! What I found that makes this a piece of cake is using a pully installer for the PS pump. I had to add a part from a canvass eyelet tool so that the insert installs flat to the frame. The pully installer has a bearing in it. That helps a lot. I had the pully installer because this was a manual to power conversion.
Submitted on July 06, 2022 by James S.
YES I would recommend this product.
Quality
Value
In Stock!
