CROSS MEMBER, Front Floor, repro, each, behind radiator support, repro, strut rod front mounting point, Welds to front frame extensions
NPD Part Number : 010852-4A Manufacturer Reference #'s: 3648NG, D0OZ-6510852-B
1971-1973 MUSTANG
1971-1973 COUGAR
1970-1970 TORINO 429
1971-1971 TORINO
1970-1970 FALCON (FROM 1/1/70), 429
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
This crossmember had a made in Taiwan sticker on it, but I didn't see any quality issues with it. It is made from the same gauge (1/8"+) metal as the original I cut out. It was welded together in the exact same spots as the original. It has all the nutserts in the correct locations. It has all the holed for the wiring harness retainers in the correct spots. When compared to my beat up original the strut rod pockets looked exactly the same. And, most importantly it fit in place exactly as the orginal. I marked the locations of the factory spot welds and then drilled and plug welded them along with fillet welding the edges like the factory did. Have fun with the overhead plug welds on the underside of the frame. The price is a little high, but when you are fixing a 50 year old car be grateful you can find "new" parts at all. Please keep the classics on the road and out of the scrap yards! Side note: I am a retired mechanical engineer with slightly above novice welding skills, so if you have any questions about your welding ability I would sugest you pay a welder to weld this in. It is a structural component of the frame and suspension and would be a safety issue if not welded correctly.
Submitted on February 15, 2021 by Wade A.
YES I would recommend this product.
Quality
Value
Worked fine, very well built,
Submitted on July 13, 2022 by david b.
YES I would recommend this product.
Quality
Value
In Stock!
