Combines a distribution block with a preset disc/drum proportioning valve. For use with custom brakes where a customizable fit is the perfect situation. Comes with a brake warning switch installed. Has 1/2”-20 brake warning switch threads. See 13A480-1A for matching wire extension. Use with the 2B092-1C, 1CA, 1CB, 1L, 1LA, 1LB bottom mount or LH mount brackets to locate the valve next to or below the master cylinder. See the line kits 2B092-1CC, 1CCS, 1CD, 1CDS to feed fluid directly from the master cylinder into this valve. ** An installation sheet in available on our website **.
See 2B091-20BAK for mounting kit, 914-7A for centering tool and 13A480-1A for wire plug lead.
1948 (48), 1949 (49), 1950 (50), 1951 (51), 1952 (52), 1953 (53), 1954 (54), 1955 (55), 1956 (56), 1957 (57), 1958 (58), 1959 (59), 1960 (60), 1961 (61), 1962 (62), 1963 (63), 1964 (64), 1965 (65), 1966 (66), 1967 (67), 1968 (68), 1969 (69), 1970 (70), 1971 (71), 1972 (72), 1973 (73), 1974 (74), 1975 (75), 1976 (76), 1977 (77), 1978 (78), 1979 (79), 1980 (80), 1981 (81), 1982 (82), 1983 (83), 1984 (84), 1985 (85), 1986 (86), 1987 (87), 1988 (88), 1989 (89), 1990 (90), 1991 (91), 1992 (92), 1993 (93), 1994 (94), 1995 (95), 1996 (96), 1997 (97), 1998 (98), 1999 (99), 2000 (00), 2001 (01), 2002 (02), 2003 (03), 2004 (04), 2005 (05), 2006 (06)NPD Part Number : 2B091-20BA Manufacturer Reference #'s: PV2,
Product Instructions and Additional Info:
Proportioning Valve Kit Installation Instruction AC Delco style Proportioning Valve 2B091-20BA Illustration 2B091-20BA Instructions 21965-1973 MUSTANG
1979-1993 MUSTANG
1967-1973 COUGAR
1960-1970 FALCON (BEFORE 1/1/70)
1955-1957 TBIRD
1948-1979 F1-F350
1980-1996 F100-F350
1997-2004 F150-F350
1966-1996 BRONCO
1967-1981 CAMARO
1964-1987 CHEVELLE
1967-1981 FIREBIRD
1962-1979 NOVA
1964-1972 TEMPEST GTO, TEMPEST, LEMANS
1947-1998 CHEVY TRUCK
1964-1988 CUTLASS
1964-1972 SKYLARK
1960-1976 MOPAR
1983-2004 R/B/E/M
1979-1986 CAPRI
1970-1970 FALCON (FROM 1/1/70)
1968-1971 TORINO
1964-1970 FAIRLANE
0-0 ** CAN BE USED ON ANY MODEL, OE CORRECT FOR BELOW **
1971-1981 CAMARO USE ON FRONT DISC / REAR DRUM BRAKE SYSTEMS
1971-1977 CHEVELLE CHEVELLE, EL CAMINO AND MALIBU, USE
0-0 ON FRONT DISC / REAR DRUM BRAKE SYSTEMS
1971-1981 FIREBIRD USE ON FRONT DISC / REAR DRUM BRAKE SYSTEMS
1971-1979 NOVA USE ON FRONT DISC / REAR DRUM BRAKE SYSTEMS
1971-1972 TEMPEST GTO, LEMANS AND TEMPEST, USE
0-0 ON FRONT DISC / REAR DRUM BRAKE SYSTEMS
1971-1977 CUTLASS USE ON FRONT DISC / REAR DRUM BRAKE SYSTEMS
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
The part was exactly what I had fit and worked pefect
Submitted on October 01, 2018 by kenneth m.
YES I would recommend this product.
Quality
Value
LOOKS LIKE QUALITY PART
Submitted on November 08, 2018 by Brian B.
YES I would recommend this product.
Quality
Value
Rien à dire tout et correcte.
Submitted on October 20, 2019 by FREDERIC V.
YES I would recommend this product.
Quality
Value
Good quality product. Fit was very good, I did have to get a 1/4 to 3/16 adapter for the rear brake inlet port.
Submitted on May 21, 2020 by Boris G.
YES I would recommend this product.
Quality
Value
as advertised
Submitted on July 15, 2020 by Dan S.
Quality
Value
I was very glad to find this, as the original factory type is obsolete. Set up a bit differently, it will take some lengthening of the front brake lines, but that's nothing earth shattering.
Submitted on July 20, 2020 by Neil S.
YES I would recommend this product.
Quality
Value
very good parts
Submitted on April 11, 2021 by kenneth d.
YES I would recommend this product.
Quality
Value
Worked great before it started leaking around the factory bleeder location.
Submitted on June 16, 2021 by Jason D.
YES I would recommend this product.
Quality
Value
it worked great
Submitted on April 05, 2023 by george h.
Quality
Value
Used to replace the separate factory KH proportioning valve and distribution block on a 1965 Mustang. Hardest part of the job was bending new brake lines from the previously installed dual bowl master cylinder to the valve. Works great!
Submitted on July 05, 2023 by Barry L.
YES I would recommend this product.
Quality
Value
Immediately started leaking out of the front where the rubber cap is. If you take the front out of it then you can put a tiny O-ring in the cap where the needle runs through the cap. That stopped the leak for me.
Submitted on September 01, 2023 by Andrew S.
Quality
Value
In Stock!