2 row, 1 1/4” tubes, 82 cores, 16 fins per inch, 19 5/8” core width x 16 1/2” core height x 3” core thickness, inlet 1 3/4” RH, outlet 1 1/2” LH, 6” trans cooler. Front mount.
High efficiency core. OE style stamped and polished tanks. OE mounting. 100% TIG welded no epoxy used anywhere. Lifetime manufacturers warranty. The design of these radiators gives them a 10% cooling advantage over the Champion 4 row and 20% over the Champion 3 row. Drain cock is included and a factory fan shroud for the same application will fit.
See 8006-2AK, 8006-2CK, 8006-3AK, 8006-3CK for mounting hardware options.
Note: Thicker than original radiators may require a shorter fan spacer, a different fan or an electric fan. Check for a minimum of 1/2” clearance (1” preferred) between the fan and radiator core BEFORE you start your engine! Thicker than original radiators may also need modifications to the saddle mounts to fit the thicker tanks and for the location of the drain cocks. 67’s using 24” extra cooling radiators, brass or aluminum, will require the use of 68-70 lower mounts (8052-1A, 1B, 1C) for a proper mounting.
Aluminum radiators and heater cores require 50/50 mix coolant replacement at least every 24 months or 30,000 miles to maintain the necessary silicate levels that prevent corrosion in aluminum.
** Note: Fastening of fans or other accessories to the radiator through the core will VOID any warranty.
** Note: Cold Case requires customers to contact them directly for any radiator defects or warranty claims. Do not return any product to NPD. **
Ford Mustang Years:
1967 (67), 1968 (68), 1969 (69), 1970 (70)
Above years shown are used for searches and are not application listings.
Mercury Cougar Years:
1967 (67), 1968 (68), 1969 (69), 1970 (70)
Above years shown are used for searches and are not application listings.
Ford Fairlane and Ranchero Years:
1969 (69)
Above years shown are used for searches and are not application listings.
Ford Torino and Ranchero Years:
1969 (69)
Above years shown are used for searches and are not application listings.
NPD Part Number : 8005-3HA Manufacturer Reference #'s: FOM560A,
1969-1970 MUSTANG 250, A/T
1969-1970 MUSTANG 302, 351W, A/T, LH OUTLET
1969-1970 COUGAR 302, 351W, A/T, LH OUTLET
1969-1969 TORINO 302, 351W, A/T, LH OUTLET
1969-1969 FAIRLANE 302, 351W, A/T, LH OUTLET
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Beautiful piece. The fit for my 1970 Mach 1 351w was great. I also purchased a replacement fan shroud at the same time. I had to make a slight adjustment to the mounting tab hole on the lower driver side so the shroud would clear the fan. Very minor and it works great. Could have been an issue with the shroud, easy fix. Haven’t ran the new engine with this radiator but expect it to be fine.
Submitted on May 07, 2020 by david n.
YES I would recommend this product.
Quality
Value
Submitted on July 28, 2021 by Wihelm J.
YES I would recommend this product.
Quality
Value
In Stock!
