Cold Case Aluminum Radiator Kit

Radiator with custom aluminum fan shroud and two 12” electric fans. High efficiency core. 19.5” core height, 26.2” core width, 2.7” thick, 2 rows of 1.25” tubes, 1 3/4 “ inlet, 2” outlet, 16 fins per inch, 12” trans cooler. OE style stamped and polished tanks. OE mounting.

6 3/4” total thickness from the radiator support mounting flange.

100% TIG welded no epoxy used anywhere. Lifetime manufacturers warranty. The design of these radiators gives them a 10% cooling advantage over the Champion 4 row and 20% over the Champion 3 row. Drain cock is included and a factory fan shroud for the same application will fit. Electric fan relay harness sold separately, see 8K621-1CCA.

Note that installing a radiator that is thicker than original may reduce the clearance between the radiator and the cooling fan blades, water pump pulley or its mounting bolts. Make sure you verify before running your engine. A minimum clearance of 1/2” is required with 1” preferred. The use of a different length of fan spacer can easily remedy this.

** Aluminum radiators and heater cores require coolant replacement at least every 24 months or 30,000 miles to maintain the necessary silicate levels that prevent corrosion. **

** Note: Fastening of fans or other accessories to the radiator through the core will VOID any warranty.

** Note: Cold Case requires customers to contact them directly for any radiator defects or warranty claims. Do not return any product to NPD. **

Ford Truck F1, F2, F3, F100, F150, F250, F350 Years:
1972 (72), 1973 (73), 1974 (74), 1975 (75), 1976 (76), 1977 (77), 1978 (78), 1979 (79)
Above years shown are used for searches and are not application listings.

Ford Bronco Years:
1978 (78), 1979 (79)
Above years shown are used for searches and are not application listings.

NPD Part Number : F-8005-395AAK
Manufacturer Reference #'s: Cold Case Radiators F-8005-395AAK,