Radiator with custom aluminum fan shroud and 16 electric fan. High efficiency. 16.5 core height, 16.25 core width, 3 core thickness, 2 rows of 1 tubes, 1 1/2 RH inlet, 1 3/4 RH outlet, 16 fins per inch. OE style stamped and polished tanks. OE mounting. 100% TIG welded no epoxy used anywhere.
** Package requires 6.875 of clearance measured from the core support radiator mounting flange rearward. **
Lifetime manufacturers warranty. The design of these radiators gives them a 10% cooling advantage over the Champion 4 row and 20% over the Champion 3 row. Drain cock is included and a factory fan shroud for the same application will fit. Electric fan relay harness sold separately, see 8K621-1CCA.
See 8149-1A for fan shroud brackets and 8006-1K, 8006-1AK for mounting hardware options.
Note: Thicker than original radiators may require a shorter fan spacer, a different fan or an electric fan. Check for a minimum of 1/2 clearance (1 preferred) between the fan and radiator core BEFORE you start your engine!
Aluminum radiators and heater cores require 50/50 mix coolant replacement at least every 24 months or 30,000 miles to maintain the necessary silicate levels that prevent corrosion in aluminum.
** Note: Fastening of fans or other accessories to the radiator through the core will VOID any warranty.
** Note: Cold Case requires customers to contact them directly for any radiator defects or warranty claims. Do not return any product to NPD. **
Ford Mustang Years:
1965 (65), 1966 (66)
Above years shown are used for searches and are not application listings.
Ford Falcon and Ranchero Years:
1963 (63), 1964 (64), 1965 (65)
Above years shown are used for searches and are not application listings.
NPD Part Number : 8005-3CMK Manufacturer Reference #'s: Cold Case Radiators 8005-3CMK,
1965-1966 MUSTANG 260, 289, M/T
1963-1965 FALCON 260, 289, M/T
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Aluminium radiator quality is excellent, great welds beads. I like the shroud, easy to bolt up to the radiator. the fan bolts right up too. Than you go to put it in the car, doesn't fit, not enough clearance at th ater pump. Has anyone at NPD physically put this in a car. I'll call on my day off to see what both NPD and Cold-Case have to say.
Submitted on March 07, 2021 by Paul D.
YES I would recommend this product.
Quality
Value
Very nice construction and looks like a quality piece. But it doesn't fit in the car. Not even close. It needs probably an inch shorter water pump for this unit to fit in a stock 65-66 mustang with a 289-302. I would recommend this item for something with plenty of room.
Submitted on February 14, 2022 by Kevin B.
Quality
Value
In Stock!
