Custom designed specifically for coil springs located on top of the control arm and inside a shock tower. An inside the spring compressor is easy to use and very safe when handled properly. This compressor is made from the finest materials available for this application and is made from the strongest materials possible. The body of this tool is made from 3/4 inch extra heavy schedule 80 pressure tested A53 pipe and 3/4 inch ACME threaded rod with an EXTRA heavy ACME nut with washer. The lower plate is CNC laser cut for a perfect fit and MIG welded to the body for superior strength. The upper plate used for Mustang and Cougar applications is also CNC laser cut. All other hardware is Grade 8 (hardened to 120,000 psi tensile strength). As an added benefit, our version of this compressor includes an upper thrust bearing that makes operating the compressor easier and smoother. A truly bullet proof design. These are hand built and welded by an ASME certified welder, hand inspected for quality and painted.
Installs in place of the shock absorber. Make sure the vehicle is properly supported. Do not use any powered means to tighten or loosen the nut. Turn by hand only.
ASSEMBLY NOTE: The flat washer fits between the bearing and the nut. also it helps to grease the threads of the shaft before use. Instructions can be downloaded from our website listing.
Ford Mustang Years:
1965 (65), 1966 (66), 1967 (67), 1968 (68), 1969 (69), 1970 (70), 1971 (71), 1972 (72), 1973 (73)
Above years shown are used for searches and are not application listings.
Mercury Cougar Years:
1967 (67), 1968 (68), 1969 (69), 1970 (70), 1971 (71), 1972 (72), 1973 (73)
Above years shown are used for searches and are not application listings.
Ford Falcon and Ranchero Years:
1960 (60), 1961 (61), 1962 (62), 1963 (63), 1964 (64), 1965 (65), 1966 (66), 1967 (67), 1968 (68), 1969 (69), 1970 (70)
Above years shown are used for searches and are not application listings.
Ford Fairlane and Ranchero Years:
1964 (64), 1965 (65), 1966 (66), 1967 (67), 1968 (68), 1969 (69), 1970 (70)
Above years shown are used for searches and are not application listings.
Ford Torino and Ranchero Years:
1968 (68), 1969 (69), 1970 (70), 1971 (71)
Above years shown are used for searches and are not application listings.
Chevrolet Nova / Chevy II Years:
1965 (65), 1966 (66), 1967 (67)
Above years shown are used for searches and are not application listings.
Product Instructions and Additional Info:
Instruction sheet Instructions 988-31_instruction Instructions1965-1973 MUSTANG
1967-1973 COUGAR
1960-1970 FALCON (BEFORE 1/1/70)
1965-1967 NOVA NOVA, CHEVY II
1970-1970 FALCON (FROM 1/1/70)
1968-1971 TORINO
1966-1970 FAIRLANE
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
The spring compressor worked well but it should be shipped with some use instructions. Once I greased the screw shaft it worked much better. Unfortunately there was some wear damage to the shaft. It is probably reliablely functional but the damage could have been avoided if some pre usage info had been shipped with the spring compressor.
Submitted on August 09, 2021 by Paul K.
YES I would recommend this product.
Quality
Value
The product does not come with any instructions and or photo's.
Submitted on September 30, 2021 by John S.
YES I would recommend this product.
Quality
Value
Absolutely everything I expected. Removes all the danger in removing the front suspension of my 69 Mach. I found it easy to use . I would never again attempt front spring removal on this type of suspension with out it. The only thing I would suggest is a note with a simple set of usage instructions for a novice , I personally didn't need the instructions . but I can see that a person that hasn't tackled this job before would possibly be a little unsure of how to position it in the suspension.
Submitted on October 12, 2021 by David S.
YES I would recommend this product.
Quality
Value
Perfect for the job. Completely cuts out any doubt about safety in removing coil springs.
Submitted on December 16, 2021 by Dave S.
YES I would recommend this product.
Quality
Value
Submitted on June 23, 2022 by George P.
YES I would recommend this product.
Quality
Value
This is worth its weight in gold. Highly recommend this one. Made to job so easy and less SKETCHY! Wish I had it in the beginning. As others have mentioned. There are now instructions and common sense and knowledge is required.
Submitted on February 02, 2023 by Eric H.
YES I would recommend this product.
Quality
Value
Made a difficult and potentially dangerous job, very safe and easy to do. Highly recommend! Well worth the money.
Submitted on March 29, 2023 by Charles C.
YES I would recommend this product.
Quality
Value
Works like a charm.
Submitted on July 10, 2023 by Carl E.
YES I would recommend this product.
Quality
Value
This coil spring compressor is the absolute best and safest spring compressor I have used. It does take a little time to get the spring perch bolts to UCA to line-up, but there is no fear of the spring flying out while you move things around. After the first spring install on the drivers side, I said to myself, “well worth the price!”. If your hobby or job involves having to remove and install these coil springs, do yourself a huge favor and get this extremely safe spring compressor. 1969 Mach 1, 428 CJ
Submitted on September 29, 2023 by Nolan S.
YES I would recommend this product.
Quality
Value
Was easy to use and well made. After several attempts using my other compressor with no luck purchased this one. Was far easier to compress the spring and less dangerous. Only issue was lining up the saddle to the upper control arm mounting holes. Took a couple of tries by turning the saddle some each time and using rotating saddles.
Submitted on October 26, 2023 by Charles G.
YES I would recommend this product.
Quality
Value
It worked when others didn't. Was able to finish BOTH front springs in short order.
Submitted on November 28, 2023 by Steve L.
YES I would recommend this product.
Quality
Value
Indispensable. Safest way to handle spring removal/install.
Submitted on December 13, 2023 by RM S.
YES I would recommend this product.
Quality
Value
This is clearly a well designed and well constructed product. Because of the risk ans danger involved in using a tool to compress, a strong spring, one needs to have confidence in their compressor. I believe this tool will give you that confidence and ishighly recommended. A+++ Steve.Meltzer
Submitted on December 29, 2023 by Steve M.
YES I would recommend this product.
Quality
Value
Great tool, but no instructions
Submitted on February 03, 2024 by John V.
YES I would recommend this product.
Quality
Value
Quality tool. Well built and easy to use.
Submitted on April 12, 2024 by Allen D.
YES I would recommend this product.
Quality
Value
Works exactly as it should. I had no difficulty in attaching the tool to the spring perch and shock tower. I'm very pleased with this product.
Submitted on April 16, 2024 by Ronald E.
YES I would recommend this product.
Quality
Value
works very well!
Submitted on April 19, 2024 by James N.
YES I would recommend this product.
Quality
Value
Worked well. Safest way to change the coil springs
Submitted on May 21, 2024 by richard c.
YES I would recommend this product.
Quality
Value
Great product makes installation of springs easier and safer!
Submitted on June 25, 2024 by Bill P.
YES I would recommend this product.
Quality
Value
Submitted on July 18, 2024 by James M.
YES I would recommend this product.
Quality
Value
Works great.
Submitted on September 18, 2024 by Eldon S.
YES I would recommend this product.
Quality
Value
I did a lot of research on spring tools for safely removing the coil springs on my 65 Stang. This tool appears to be the best option for safely removing the springs. A bit more expensive than others. I haven’t used it yet, but it looks very good quality. I give it 4 stars because of the price.
Submitted on September 20, 2024 by Edward G.
YES I would recommend this product.
Quality
Value
This compressor is the best (and safest) one that I have ever used for springs above the upper control arm. Hands Down The Best!!!!
Submitted on September 20, 2024 by Harvey V.
YES I would recommend this product.
Quality
Value
Submitted on September 23, 2024 by Chuck T.
YES I would recommend this product.
Quality
Value
This tool felt, by far, the safest way to remove the coil spring. I recommend also removing the inner shock/spring cover plate to make accessing the spring easier when you remove it. A solid, well built product.
Submitted on November 25, 2024 by Cee G.
YES I would recommend this product.
Quality
Value
In Stock!