CHOKE TUBE SET, stainless steel, By Classic Tube, All required flared fitting ends are SAE grade double flared, Lines are CNC bent in stainless steel for improved durability and show, Tubing is US-made SAE J526 spec, Concours approved,
NPD Part Number : 9819-1AS Manufacturer Reference #'s: Classic Tube MUK1001-SC, C2OZ-9819-A, CM-1715, C3AZ-9820-A
1965-1966 MUSTANG 260, 289
1967-1968 MUSTANG 289-2V, 302-2V
1969-1973 MUSTANG 302-2V
1967-1968 COUGAR 289-2V, 302-2V
1963-1966 FALCON 260, 289, 302
1967-1968 FALCON 289-2V, 302-2V
1966-1966 FAIRLANE 289, 302
1968-1968 TORINO 289-2V, 302-2V
1967-1968 FAIRLANE 289-2V, 302-2V
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
if you could include a little instruction information.
Submitted on January 30, 2019 by Donald B.
YES I would recommend this product.
Quality
Value
Please don't send me these "rating" emails any more.
Submitted on August 31, 2019 by James B.
Quality
Value
Submitted on August 18, 2020 by Ed P.
YES I would recommend this product.
Quality
Value
Good heavy gauge tubing and includes everything you need. Note that this will work with the choke assemblies with the connection on the rear of the choke assembly, pointing slightly downward to the intake manifold, and also a fitting for the air inlet near the carburetor. I tried to use this with a early 1963 Autolite 4100 from a FE engine (installed on a 302) but the choke tube on the early carb connects on the front passenger side of the choke assembly. I swapped over a choke assembly from a later carb so that I was able to use this tube. Also note that the early FE 4100 did not have the fresh air intake fitting, so it will either be breathing non-filtered air or I will need to modify my air filter housing. None of this is an issue if you use it on a small block with the correct carburetor. It should work perfectly!
Submitted on April 01, 2021 by Benjamin T.
YES I would recommend this product.
Quality
Value
Submitted on February 14, 2024 by Tom P.
YES I would recommend this product.
Quality
Value
Worked well, looks factory.
Submitted on April 17, 2024 by TROY S.
YES I would recommend this product.
Quality
Value
In Stock!
