CHOKE TUBE SET, carbon steel, By Classic Tube, All required flared fitting ends are SAE grade double flared, Lines are CNC bent in either carbon steel or in stainless steel for improved durability or show, Tubing is US-made SAE J526 spec. Carbon tubing has a galvanized type top coating that simulates the original Terne coating, ASTM B117 salt spray test is 3000 hours where originals only passed 250 hours, Concours approved, Stainless steel lines have an S at the end of the part number suffix for easy identification, In regards to the coating applied to carbon steel lines:The original Tinned Bundy Weld "TBW" tubing was originally manufactured by supplier Bundy Corporation, had a corrosion resistant coating called Terne coating, Unfortunately that top coating is no longer available because of a ruling outlawing the lead and tin dip process by the EPA almost 20 years ago, At the end of that time Bundy Corp. was moving that coating process to two of their other plants until finally the enforcement pushed them to comply, At that time Bundy Corp. had already switched to offering a few different aluminum rich coatings that was then the new OEM standard, In the end Classic Tube was successful in sourcing tubing made in the USA that is SAE J 526 specification and has a "galvanized" type top coating that simulates the original Terne coating, You may also be interested in knowing the results of the ASTM B117 salt spray test was only 250 hours for the old Terne coating, This tubing has passed at 3000 hours, Classic Tube does not useAluminized tubing, Zinc plated or the Off-Shore tubingthat the other manufacturers use and have the finishes that people dislike,
NPD Part Number : 9819-1A Manufacturer Reference #'s: Classic Tube MUK1001-OE, C2OZ-9819-B, CM-1715, C3AZ-9820-A
1965-1966 MUSTANG 260, 289
1967-1968 MUSTANG 289-2V, 302-2V
1969-1973 MUSTANG 302-2V
1967-1968 COUGAR 289-2V, 302-2V
1963-1966 FALCON 260, 289, 302
1967-1968 FALCON 289-2V, 302-2V
1966-1966 FAIRLANE 289, 302
1968-1968 TORINO 289-2V, 302-2V
1967-1968 FAIRLANE 289-2V, 302-2V
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Another great item from NPD. Works perfect excellent fit.
Submitted on October 07, 2019 by Guillermo Z.
YES I would recommend this product.
Quality
Value
Perfect fit on a ‘68 289. Truck runs better and is burning less gas and exhaust sounds better too.
Submitted on April 06, 2020 by Judson P.
YES I would recommend this product.
Quality
Value
Excellent fit
Submitted on March 01, 2021 by Frank F.
Quality
Value
I bought this kit with the stove pipe fitting and the clean air tube is very loose, comes out by itself. Not sure which part is at fault. Maybe with heat it will tighten up. Otherwise the kit is sweet.
Submitted on March 15, 2021 by James J.
YES I would recommend this product.
Quality
Value
Had some fitment issues where the tube ends didn't fit into the manifold holes. They were a little to large so I ended up sanding down the ends to get them to fit in. Also no instructions made it difficult to figure out which tube was which, and which end went where. After some trial and error everything when to together and looks good. Good value, but this really needs to come with install info.
Submitted on June 21, 2021 by Ryan C.
YES I would recommend this product.
Quality
Value
these parts almost installed themselves!! I only had to do the most minor tweeking and both parts fix exactly as they should. The heat shield was a bit of a tight fit, but no issue to install either. A++++ product
Submitted on July 25, 2021 by Ron P.
YES I would recommend this product.
Quality
Value
excellent fit, top quality tubing, and heat shield material, would recommend this product
Submitted on August 09, 2021 by Ron P.
YES I would recommend this product.
Quality
Value
Glad to purchase from NPD (fitment was fine). We're a small restoration shop not located in the state of FL, so not being charged tax at the sale helps avoid double billing tax errors to the customer on the final invoice for our state taxes. I always check for availability at NPD first.
Submitted on November 12, 2021 by Michael M.
YES I would recommend this product.
Quality
Value
Submitted on April 08, 2022 by JOEY S.
YES I would recommend this product.
Quality
Value
Submitted on June 07, 2022 by Michael J.
YES I would recommend this product.
Quality
Value
Works a hundred percent as advertised works fantastic
Submitted on July 16, 2023 by Joel p.
YES I would recommend this product.
Quality
Value
Just like the original tubes.Easy to install.
Submitted on September 12, 2023 by Danny S.
YES I would recommend this product.
Quality
Value
In Stock!
