CABLE, Carburetor Manual Choke, repro, Includes cable, sheath, correct black knob with *C* and dash mounting bracket, See 373624-SK for firewall grommet and 9792-1A, 31061-SA for choke retainer clip options,
NPD Part Number : 9700-1A Manufacturer Reference #'s: HiPo Chk Cbl, C5ZZ-9700-C
1965-1966 MUSTANG 289 HIPO
1967-1967 MUSTANG 289 HIPO, USEABLE BUT NOT CORRECT, BRACKET WAS DIFFERENT AND SOME 67’S DID NOT HAVE THE *C* IN THE KNOB
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
While this choke cable looks good and has a rubber sheath covering the outer cable, it doesn't work well at all if the cable is installed with any bends. The problem is too much clearance/slop between the inner wire and the outer sleeve. If the cable is not routed straight then the slop allows the knob end to be pulled out too far to where the inner wire is exposed. All while moving the business end connected to the carburetor only an inch or so. Once the knob is pulled out to far, it's difficult to get it pushed back in. There are cables available for 1/3 the price that work properly, but they won't look original. In this case, I'd rather have a choke that works.
Submitted on September 03, 2019 by Jeff K.
Quality
Value
Only reason I did not give 5 star. The tip came off and had to get off my butt and find a small alien key to tighten it back up. Other then that. It is a nice looking and working
Submitted on January 29, 2022 by Scott g.
YES I would recommend this product.
Quality
Value
In Stock!
