CALIPER KIT, Front Disc Upgrade, D52 by Wilwood, Black powder coated finish, 2 piston forged billet aluminum w/ stainless steel pistons and high temperature seals, incl hardened slide pins and BP-10 high friction pads, mounts in stock location over stock rotors using stock brackets (not incl), 1978-newer models req C-4680W-6SK line kit
0-0 * INCL 2 CALIPERS, 4 HARDENED SLIDE PINS AND 4 BP-10 HIGH
0-0 FRICTION PADS, MOUNTS IN STOCK LOCATION W/ STOCK BRACKET *
1969-1981 CAMARO REPLACES 1-PISTON CAST CALIPERS, 1978-81 MODELS REQ
0-0 C-4680W-6SK HOSE KIT TO CONVERT FROM METRIC TO STD FITTING
1969-1977 CHEVELLE CHEVELLE, EL CAMINO AND MALIBU, REPLACES 1-PISTON CALIPERS
1969-1981 FIREBIRD REPLACES 1-PISTON CAST CALIPERS, 1978-81 MODELS REQ
0-0 C-4680W-6SK HOSE KIT TO CONVERT FROM METRIC TO STD FITTING
1969-1979 NOVA REPLACES 1-PISTON CAST CALIPERS, 1978-79 MODELS REQ
0-0 C-4680W-6SK HOSE KIT TO CONVERT FROM METRIC TO STD FITTING
1969-1977 TEMPEST GTO, LEMANS AND TEMPEST, REPLACES 1-PISTON CALIPERS
1981-1987 CHEVY TRUCK 1/2 TON 2WD W/ 1 INCH THICK ROTOR, REPLACES 1-PISTON CALIPERS, REQS
0-0 C-4680W-6SK HOSE KIT TO CONVERT FROM METRIC TO STD FITTING
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
These fit with no problem on my 1979 z-28. The only problem I had was bleeding the calipers. I could not get the bleed valves to discharge fluid no matter how loose I made the fittings. I finally removed them entirely and let the fluid gravity bleed out the opening. This removed all air bubbles and got good pedal feel. The brake pads are made of pretty aggressive material and you hear grinding when they are applied. Don’t know if they will quiet down after they bed in; if not I will replace with the pads used on my oe calipers.
Submitted on April 13, 2023 by James F.
YES I would recommend this product.
Quality
Value
In Stock!
