Repro. Each. 2 required. Takes the looseness out of the shifter handle and also cures rattles. Install with white lithium grease.
Ford Mustang Years:
1965 (65), 1966 (66), 1967 (67), 1968 (68), 1969 (69), 1970 (70), 1971 (71), 1972 (72), 1973 (73)
Above years shown are used for searches and are not application listings.
Mercury Cougar Years:
1967 (67), 1968 (68), 1969 (69), 1970 (70), 1971 (71), 1972 (72), 1973 (73)
Above years shown are used for searches and are not application listings.
Ford Falcon and Ranchero Years:
1966 (66), 1967 (67), 1968 (68), 1969 (69), 1970 (70)
Above years shown are used for searches and are not application listings.
Ford Fairlane and Ranchero Years:
1966 (66), 1967 (67), 1968 (68), 1969 (69), 1970 (70)
Above years shown are used for searches and are not application listings.
Ford Torino and Ranchero Years:
1968 (68), 1969 (69), 1970 (70), 1971 (71)
Above years shown are used for searches and are not application listings.
NPD Part Number : 7A133-1 Manufacturer Reference #'s: TRA-643-541, C5ZZ-7A133-A, C9ZZ-7A133-A, D5ZZ-7A133-A, D5ZZ-7A133-B
1965-1973 MUSTANG A/T, 2 REQD
1979-1979 MUSTANG C3, C4, 2 REQD
1980-1981 MUSTANG C4 A/T, 2 REQD
1980-1986 MUSTANG C3 A/T, 2 REQD
1982-1986 MUSTANG C5 A/T
1984-1986 MUSTANG 3.8L, AOD, 2 REQD
1984-1993 MUSTANG 5.0L, AOD, 2 REQD
1967-1968 COUGAR C4
1967-1973 COUGAR C6
1969-1973 COUGAR FMX
1966-1970 FALCON (BEFORE 1/1/70), C4
1970-1970 FALCON (FROM 1/1/70), C4, C6
1968-1971 TORINO C4, C6
1966-1970 FAIRLANE C4, C6
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Amazing what 2 little shims can do for a sloppy shifter. Works like new now
Submitted on September 03, 2018 by Richard B.
Quality
Value
Works as expected. -1 star for $20 shipping to Canada on a $1.25 part that weighs about 2 grams and can probably go in an envelope or much smaller box.
Submitted on October 26, 2018 by Frank H.
YES I would recommend this product.
Quality
Value
Incredibly low cost fix for the chronically loose C4 shifter on my "66 that has annoyed me for years. Install not difficult for beginner mechanic.
Submitted on November 09, 2018 by Eric S.
YES I would recommend this product.
Quality
Value
Perfect fit and effectively stopped the shifter handle from wobbling. Note: you need 2 of these.
Submitted on November 18, 2018 by loren f.
YES I would recommend this product.
Quality
Value
Submitted on November 25, 2018 by Jamie E.
YES I would recommend this product.
Quality
Value
Submitted on May 12, 2019 by Gregory R.
YES I would recommend this product.
Quality
Value
These worked exactly as advertised.
Submitted on May 24, 2019 by Robert R.
YES I would recommend this product.
Quality
Value
This fixed the sloppy shifter
Submitted on June 28, 2019 by David B.
YES I would recommend this product.
Quality
Value
This comes as a single bushing and you will likely need two to stop the shifter wobble. This product was exactly as described and fixed my shifter wobble in my 68 mustang with C4 transmission. When disconnecting the linkage under the car I removed the bolt, however, I would have been better off removing the cotter pin instead so I did have to readjust the linkage. Fun job for a novice like me.
Submitted on July 11, 2019 by Drake R.
YES I would recommend this product.
Quality
Value
Fit perfectly made a bad shifter work like new
Submitted on June 29, 2020 by Garrett J.
YES I would recommend this product.
Quality
Value
Good fit shipped fast
Submitted on July 20, 2020 by Frank E.
YES I would recommend this product.
Quality
Value
Easy installation once shift box was removed!
Submitted on September 06, 2020 by Don T.
YES I would recommend this product.
Quality
Value
doesnt fit great with a '73. broke a few sets trying to get it all in as the shifter arm would also push one side out. not amount of cleaning helped this, the already thin plastic was slightly too thick.
Submitted on September 06, 2020 by Brian D.
YES I would recommend this product.
Quality
Value
fit well did what it was supposed to do at a fair price
Submitted on December 19, 2020 by denis S.
Quality
Value
Submitted on January 21, 2021 by Thomas H.
Quality
Value
Submitted on January 21, 2021 by Thomas H.
YES I would recommend this product.
Quality
Value
Oem fit and finish a must have for your automatic shifter
Submitted on January 22, 2021 by Mike S.
YES I would recommend this product.
Quality
Value
Oem fit and finish a must have for your automatic shifter
Submitted on January 23, 2021 by Mike S.
YES I would recommend this product.
Quality
Value
The two bushings fit like a glove and gave my old gear shifter new life.
Submitted on April 12, 2021 by MICHAEL P.
YES I would recommend this product.
Quality
Value
Bushings important for shifter workings. Good product.
Submitted on April 27, 2021 by Bob B.
YES I would recommend this product.
Quality
Value
Indispensable part if you want your automatic floor shifter to work smoothly. Fits snugly but works great.
Submitted on June 01, 2021 by Bob B.
YES I would recommend this product.
Quality
Value
As advertised
Submitted on August 06, 2021 by David C.
YES I would recommend this product.
Quality
Value
“Got to have” when rebuilding the automatic shifter.
Submitted on August 06, 2021 by David C.
YES I would recommend this product.
Quality
Value
Perfect
Submitted on November 29, 2021 by Charlie H.
YES I would recommend this product.
Quality
Value
Exactly as described.
Submitted on February 11, 2022 by Ronald N.
YES I would recommend this product.
Quality
Value
Nice product. Tightened up the shifter
Submitted on March 20, 2022 by Roger A.
YES I would recommend this product.
Quality
Value
Awesome parts. Got rid of the wobbliness in my shifter and made it feel like new. Easy enough to install as well.
Submitted on July 20, 2022 by Eric P.
YES I would recommend this product.
Quality
Value
Submitted on July 21, 2022 by Paul J.
Quality
Value
I used this bushing on a 66 Mercury Cyclone and it works great
Submitted on July 28, 2022 by Paul J.
YES I would recommend this product.
Quality
Value
Bushing fit like they should. Really took away the slop from the shifter. It’s an easy install.
Submitted on August 19, 2022 by Michael M.
YES I would recommend this product.
Quality
Value
Exactly as needed, and don’t be a bonehead like me and order two. Great company with great customer service!
Submitted on October 05, 2022 by Steve L.
YES I would recommend this product.
Quality
Value
On point
Submitted on January 24, 2023 by Jerry B.
YES I would recommend this product.
Quality
Value
Submitted on April 05, 2023 by Kevin O.
Quality
Value
Took slop out of shifter handle. Works great. You might want to get grommet at the end of shifter rod under car also.
Submitted on April 19, 2023 by Roy L.
YES I would recommend this product.
Quality
Value
Fit perfectly
Submitted on August 13, 2023 by rafael i.
YES I would recommend this product.
Quality
Value
If your shifter has any play/movement side to side this bushing fixes that just make sure you get two sold each.. not pair. Easy install shifts like band new.
Submitted on April 02, 2024 by Steven M.
YES I would recommend this product.
Quality
Value
Submitted on August 05, 2024 by Jeff S.
YES I would recommend this product.
Quality
Value
Submitted on August 21, 2024 by DAVID B.
YES I would recommend this product.
Quality
Value
In Stock!
