BUMPER, Fold Down Seat Latch, repro, pair
NPD Part Number : 613B30-2A Manufacturer Reference #'s: C7ZZ-6361330,
1967-1968 MUSTANG FASTBACK
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
was a ok product
Submitted on October 09, 2018 by Donald w.
YES I would recommend this product.
Quality
Value
I've been in the hobby since 1978, I'm a member of NorCal SAAC and have used a lot of reproduction parts over all these years. This is not a good reproduction or what I've come to expect from Daniel Carpenter Reproductions. First of all when you look at the bumpers from the back side, the thickest part where the seat touches the bumper and all the compression happens is not as thick as the original. The original is 5/16" at the thickest point where the repro is only 1/4" thick or 1/16" thinner. Also the bumper fits very loose on the latch and will probably need to be glued to stay on. The opening on the original bumper is 5/16" where the repo's opening is 11/32" or 1/32" larger. Doesn't sound like a lot but it's the difference between a nice snug fit or rattling around without glue. And lastly inside of the bumper there is a bump that locks into a slot on the latch. On the original bumper it is 1/16" tall and the repo's is half that at 1/32" tall and barely engages the slot. And on one of them most of the bump is missing right out of the package and doesn't engage the slot at all. So overall the bumper fits very loose and doesn't compress as much as the original where it needs too. So it's not going on my car and I'm hoping a different repo will fit correctly.
Submitted on January 08, 2021 by Dana R.
Quality
Value
Submitted on February 12, 2021 by Ryan V.
YES I would recommend this product.
Quality
Value
Fits like a glove.
Submitted on November 15, 2024 by Luciano G.
YES I would recommend this product.
Quality
Value
In Stock!
