BUMPER, Door Window Lower Stop, repro, each, 1 5/8 inch long x 1 3/8 inch wide x 1 1/4 inch tall, Slightly shorter than the C7SZ-6521762-A used in 69-70 fastback and all 71-73 but usable, Slightly taller than the D0ZZ-6521762-A bumper used in 70 with bolt in glass but usable,
NPD Part Number : 21762-1 Manufacturer Reference #'s: 615, C5ZZ-6521762-A, C5ZZ-6521762-B, C7ZZ-7621762-A, C7SZ-6521762-A, D0ZZ-6521762-A
1965-1967 MUSTANG (BEFORE 12/30/66), NOT USED IN EARLY 64 PRODUCTION CARS, DATE OF INTRODUCTION IS UNKNOWN
1967-1968 MUSTANG (FROM 12/30/66), CONVERTIBLE, REPLACEMENT
1967-1968 MUSTANG (FROM 12/30/66), COUPE, FASTBACK
1969-1969 MUSTANG CONVERTED TO 70 STYLE BOLT IN GLASS, REPLACEMENT
1970-1970 MUSTANG COUPE, CONVERTIBLE, BOLT IN GLASS, REPLACEMENT IS SLIGHTLY TALLER THAN THE ORIGINAL
1969-1970 MUSTANG FASTBACK, 3/16 INCH SHORTER THAN ORIGINAL BUT USABLE
1971-1973 MUSTANG 3/16 INCH SHORTER THAN ORIGINAL BUT USABLE
1967-1968 COUGAR
1970-1970 COUGAR COUPE, CONVERTIBLE, BOLT IN GLASS, REPLACEMENT IS SLIGHTLY TALLER THAN THE ORIGINAL
1970-1970 TORINO BODY 76 (CONVERTIBLE)
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Fits like the original.
Submitted on January 01, 2019 by Keith R.
YES I would recommend this product.
Quality
Value
Good fit , went right in easily
Submitted on January 24, 2019 by Doug C.
YES I would recommend this product.
Quality
Value
Submitted on May 29, 2019 by kevin c.
Quality
Value
Just like the originals on my 68' Metuchen Built Coupe.
Submitted on July 23, 2019 by Leonard B.
YES I would recommend this product.
Quality
Value
just like the originals
Submitted on October 02, 2019 by scott s.
YES I would recommend this product.
Quality
Value
Fair price and good fit.
Submitted on October 31, 2019 by Scott M.
YES I would recommend this product.
Quality
Value
Works good after a little trimming
Submitted on March 30, 2020 by Richard Y.
YES I would recommend this product.
Quality
Value
Sort of easy to install. I lubed the bottom with silicone grease then using a long skinny screwdriver wedged one side of the bottom in then using a wide screwdriver worked it in from the top from one end to the other careful not to cut it until seated.
Submitted on September 01, 2020 by Dennis Z.
YES I would recommend this product.
Quality
Value
The reason this does not get 5 stars is due to the difficulty to install. It's not NPD's fault, it's just how it's designed. Patience is required during installation. Other than that, this is exactly what you need!
Submitted on June 10, 2021 by Andy R.
YES I would recommend this product.
Quality
Value
no issues
Submitted on August 28, 2021 by Jeffrey L.
YES I would recommend this product.
Quality
Value
Great fit
Submitted on August 30, 2021 by Jason J.
YES I would recommend this product.
Quality
Value
Although not listed for a 69 fastback with glue in glass, it fit mine perfectly.
Submitted on September 13, 2021 by Russell D.
YES I would recommend this product.
Quality
Value
Great, easy to install.
Submitted on January 20, 2022 by Charles v.
YES I would recommend this product.
Quality
Value
Submitted on February 24, 2022 by mark P.
YES I would recommend this product.
Quality
Value
It’s rubber and fits where designed. I purchased an extra, cut in half and used the two pieces to make new bottom stop bumpers for my Coupes rear quarter windows (64.5). Worked /fit perfectly. I could not find an actual quarter window stop repro anywhere.
Submitted on March 01, 2022 by Kerry S.
YES I would recommend this product.
Quality
Value
Works great. Looks just like the original. If the stop doesn't snap in, use liquid soap for easier installation.
Submitted on July 16, 2022 by Blaine W.
YES I would recommend this product.
Quality
Value
Submitted on December 26, 2022 by Kevin L.
YES I would recommend this product.
Quality
Value
OK not Great
Submitted on May 11, 2023 by Ken C.
YES I would recommend this product.
Quality
Value
It fit very loosely so I had to add adhesive to hold it down. Needs to be more of a snug fit or it would rattle.
Submitted on May 22, 2023 by KEVIN W.
YES I would recommend this product.
Quality
Value
Good
Submitted on June 24, 2023 by Michael C.
YES I would recommend this product.
Quality
Value
Nice product
Submitted on February 06, 2024 by scott j.
YES I would recommend this product.
Quality
Value
Required trimming the foot to properly fit the metal frame
Submitted on September 19, 2024 by Linda H.
YES I would recommend this product.
Quality
Value
Perfect fit
Submitted on November 26, 2024 by Lynn H.
YES I would recommend this product.
Quality
Value
In Stock!
