Repro. Primed.
See 7A194-1AK, 7A194-1KA, 7A194-1KB, 7A194-1KC, 7A194-1KD, 7A194-1KF for mounting hardware options.
Ford Mustang Years:
1965 (65), 1966 (66), 1967 (67), 1968 (68), 1969 (69), 1970 (70), 1971 (71), 1972 (72), 1973 (73)
Above years shown are used for searches and are not application listings.
Mercury Cougar Years:
1967 (67), 1968 (68)
Above years shown are used for searches and are not application listings.
Ford Falcon and Ranchero Years:
1965 (65), 1966 (66), 1967 (67), 1968 (68), 1969 (69), 1970 (70)
Above years shown are used for searches and are not application listings.
Ford Fairlane and Ranchero Years:
1966 (66), 1967 (67), 1968 (68), 1969 (69), 1970 (70)
Above years shown are used for searches and are not application listings.
Ford Torino and Ranchero Years:
1968 (68), 1969 (69), 1970 (70), 1971 (71)
Above years shown are used for searches and are not application listings.
Ford Truck F1, F2, F3, F100, F150, F250, F350, Expedition, Excursion, Lincoln Navigator and Blackwood Years:
1967 (67), 1968 (68), 1969 (69), 1970 (70), 1971 (71), 1972 (72), 1973 (73), 1974 (74), 1975 (75), 1976 (76), 1977 (77), 1978 (78), 1979 (79), 1980 (80), 1981 (81), 1982 (82), 1983 (83), 1984 (84)
Above years shown are used for searches and are not application listings.
Ford Bronco Years:
1967 (67), 1968 (68), 1969 (69), 1970 (70), 1971 (71), 1972 (72), 1973 (73), 1974 (74), 1975 (75), 1976 (76), 1977 (77), 1978 (78), 1979 (79), 1980 (80), 1981 (81), 1982 (82), 1983 (83), 1984 (84)
Above years shown are used for searches and are not application listings.
Ford Mustang Fox Body, Capri, SN-95, S197, S550 Years:
1979 (79), 1980 (80), 1981 (81)
Above years shown are used for searches and are not application listings.
NPD Part Number : 7A194-1 Manufacturer Reference #'s: C5ZZ-7A194-S, C4AZ-7A194-B, C5OZ-7A194-A, D0DZ-7A194-A, D0DZ-7A194-B
1965-1973 MUSTANG (FROM 8/20/64), C4, 200, 289, 302, 351C, 351W
1979-1981 MUSTANG C4
1967-1968 COUGAR C4
1965-1970 FALCON (BEFORE 1/1/70), LATE 65, C4
1964-1964 FAIRLANE C4
1967-1984 F100-F350 C4
1967-1984 BRONCO C4
1970-1970 FALCON (FROM 1/1/70), C4
1968-1971 TORINO C4
1966-1970 FAIRLANE C4
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
I will confirm what others have said that the casting is a bit off. On two sides the lip needs to be bent to make clearance for a socket to get positive engagement on the bolt. I bolted it finger tight and bent the flange to clear the socket. I used the trans to not deform any of the pan, just the flange. Then placed gasket and no leaks.
Submitted on January 09, 2020 by Clay B.
YES I would recommend this product.
Quality
Value
Nice pan. The construction appears to be the same as the original pan. I would use this in conjunction with the LUBE LOCKER gasket, and torque to only 3 ft-lbs to avoid dimpling the pan.
Submitted on April 05, 2023 by Victor T.
YES I would recommend this product.
Quality
Value
The pan is solid but the area where bolts attach (outside rim) is to close to the bolt holes, can’t get a socket to tighten boles.
Submitted on May 12, 2023 by Matt V.
YES I would recommend this product.
Quality
Value
Just to confirm that the rolled edge is still too close to the bolt heads in some locations to permit positive engagement of a socket to the bolt head. I was able to get the bolts tight by using an open end wrench canted enough to clear the lip of the pan, and still have enough purchase to get them snug. Fortunately the torque spec is low enough to permit this approach.
Submitted on November 04, 2023 by Eric B.
YES I would recommend this product.
Quality
Value
In Stock!
