2 row, 3/4” tubes, 98 cores, 14 fins per inch, 19 1/2” core width x 16 1/2” core height x 1 3/4” core thickness, inlet 1 1/2” RH, outlet 1 1/2” LH, 6” trans cooler, front mount. US-made, good to 400 HP, high density core. all aluminum, higher fin count, 100% TIG welded no epoxy, limited lifetime manufacturer warranty.
See 8006-2AK, 8006-2CK, 8006-3AK, 8006-3CK for mounting hardware options.
Note: Thicker than original radiators may require a shorter fan spacer. Check for a minimum of 1/2” clearance (1” preferred) between the fan and radiator core BEFORE you start your engine! The use of a different length of fan spacer can easily remedy this. Thicker than original radiators may also need modifications to the saddle mounts to fit the thicker tanks and for the location of the drain cocks. 67’s using 24” extra cooling radiators, brass or aluminum, will require the use of 68-70 lower mounts (8052-1A, 1B, 1C) for a proper mounting.
Aluminum radiators and heater cores require 50/50 mix coolant replacement at least every 24 months or 30,000 miles to maintain the necessary silicate levels that prevent corrosion in aluminum.
Ford Mustang Years:
1969 (69), 1970 (70)
Above years shown are used for searches and are not application listings.
Mercury Cougar Years:
1969 (69), 1970 (70)
Above years shown are used for searches and are not application listings.
NPD Part Number : 8005-1HC2 Manufacturer Reference #'s: EC339,
1969-1970 MUSTANG 20 INCH, 302, 351C, 351W, LH OUTLET
1969-1970 COUGAR 20 INCH, 351C, 351W, LH OUTLET
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Received this radiator, and there were several issues 1) it wasnt flat and when placed on a floor it had almost a half inch of wobble. 2) the bottom outlet is poorly formed and can leak pretty easily, 3) the mounting holes and bracketry dont really line up well, so my new shroud doesnt actually fit well, and my fan rubs the shroud. pretty poor product
Submitted on April 03, 2016 by christian r.
In Stock!
