3 row, 5/8” tubes, 147 cores, 14 fins per inch, 19 1/2” core width x 16 1/2” core height x 2 1/2” core thickness, inlet 1 1/2” RH, outlet 1 3/4” RH, 6” trans cooler. Front mount. US-made, good to 650 HP, high density core. all aluminum, higher fin count, 100% TIG welded no epoxy, limited lifetime manufacturer warranty.
See 8006-2AK, 8006-2CK, 8006-3AK, 8006-3CK for mounting hardware options.
Note: Thicker than original radiators may require a shorter fan spacer. Check for a minimum of 1/2” clearance (1” preferred) between the fan and radiator core BEFORE you start your engine! The use of a different length of fan spacer can easily remedy this. Thicker than original radiators may also need modifications to the saddle mounts to fit the thicker tanks and for the location of the drain cocks. 67’s using 24” extra cooling radiators, brass or aluminum, will require the use of 68-70 lower mounts (8052-1A, 1B, 1C) for a proper mounting.
Aluminum radiators and heater cores require 50/50 mix coolant replacement at least every 24 months or 30,000 miles to maintain the necessary silicate levels that prevent corrosion in aluminum.
Ford Mustang Years:
1967 (67), 1968 (68), 1969 (69), 1970 (70)
Above years shown are used for searches and are not application listings.
Mercury Cougar Years:
1967 (67), 1968 (68), 1969 (69), 1970 (70)
Above years shown are used for searches and are not application listings.
NPD Part Number : 8005-1EC3 Manufacturer Reference #'s: CC340,
1967-1970 MUSTANG 20 INCH, 289, 302, 351C, 351W, RH OUTLET
1967-1970 COUGAR 20 INCH, 289, 302, 351C, 351W, RH OUTLET
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Top of radiator entirely scuffed. There are deep square imprints on the top of my brand new radiator. Very unhappy. My car is not a show car, or I’d be absolutely livid. I’ll have to either cover up the top of my radiator w ugly racing stickers, or build some kind of one off radiator shroud. Not cool. No I never checked inside bag before I installed.
Submitted on August 20, 2022 by joe g.
YES I would recommend this product.
Quality
Value
In Stock!
