Aluminum Radiator by Champion Cooling

2 row, 3/4” tubes, 98 cores, 14 fins per inch, 19 1/2” core width x 16 1/2” core height x 1 3/4” core thickness, inlet 1 1/2” RH, outlet 1 3/4” RH, 6” trans cooler. Front mount. US-made, good to 400 HP, high density core. all aluminum, higher fin count, 100% TIG welded no epoxy, limited lifetime manufacturer warranty.

See 8006-2AK, 8006-2CK, 8006-3AK, 8006-3CK for mounting hardware options.

Note: Thicker than original radiators may require a shorter fan spacer. Check for a minimum of 1/2” clearance (1” preferred) between the fan and radiator core BEFORE you start your engine! The use of a different length of fan spacer can easily remedy this. Thicker than original radiators may also need modifications to the saddle mounts to fit the thicker tanks and for the location of the drain cocks. 67’s using 24” extra cooling radiators, brass or aluminum, will require the use of 68-70 lower mounts (8052-1A, 1B, 1C) for a proper mounting.

Aluminum radiators and heater cores require 50/50 mix coolant replacement at least every 24 months or 30,000 miles to maintain the necessary silicate levels that prevent corrosion in aluminum.

Ford Mustang Years:
1967 (67), 1968 (68), 1969 (69), 1970 (70)
Above years shown are used for searches and are not application listings.

Mercury Cougar Years:
1967 (67), 1968 (68), 1969 (69), 1970 (70)
Above years shown are used for searches and are not application listings.

NPD Part Number : 8005-1EC2
Manufacturer Reference #'s: EC340,