1987-93 Wilwood Forged Dynalite Front Drag Brake Kit 4 Piston (Gary Anodized) Drilled Rotors

DISC CONVERSION KIT, FRONT BRAKE, WILWOOD, 5 LUG DESIGN, FORGED DYNALITE DRAG BRAKE KIT, INCL (2) DYNALITE 4 PISTON CALIPERS ( GRAY ANODIZED), (2) 10.75 INCH DRILLED ROTORS, HUBS, PADS AND MOUNTING HARDWARE, THIS KIT NOT ONLY UPGRADES YOUR FACTORY BRAKES BUT ALSO CONVERTS TO 5 LUG

If you are looking to take your Foxbody Mustang to the next level in drag racing then picking up this Dynalite Drag Series front brake kit from Wilwood is the right start! This front drag kit is one of the most popular front brake kits on the market today. This Wilwood kit not only removes weight over factory brakes but also delivers in performance braking all while mounting to your factory V8 spindle. This kit includes bolt on brackets, forged billet aluminum 5 lug hubs, 10.75 inch direct mount steel drilled rotors & Wilwoods Forged Dynalite (4) piston calipers with gray anodized finish. All required mounting hardware and pads are also included. So if you are looking to covert to 5 lug and do some serious drag racing then this kit from Wilwood is for you.

Manufacture Note:

FDL Front Drag kits are drag racings most popular front brake kits. FDL kits used on four-wheel disc cars weighing up to 2,800 pounds, or rear drum brake equipped cars weighing up to 2,400 pounds. Forged billet FDL four piston calipers mount directly to the spindle with a bolt-on bracket. Forged billet, five lug hubs with direct mount steel rotors combine to provide an average weight savings of over 30 pounds compared to stock drum or disc brakes. Kits include all new hardware, wheel bearings, seals and extra length lug studs.

Installation Note:

This Wiliwood Forged Dynalite Drag Series Front Brake Kit requires spindle modification as well as drilling and tapping the factory spindle. It is recommended that this be done by a machinist or your local performance shop. This kit requires Wilwood Brake line kit M-2078-30WWB for 87-93 Mustang.

This Brake Kit may fit 15-inch wheels. Please refer to the wheel clearance diagram to check to see if it will fit your specific wheel.

Feel free to download the installation instruction as well as see the Wheel Clearance diagram before installation or purchase of this kit.

Note:

THIS BRAKE KIT HAS A HUB OFFSET OF: +.49This Hub Offset will move the wheels outward from the fender by this amount on each side of the vehicle.

Ford Mustang Years:

1987 (87), 1988 (88), 1989 (89), 1990 (90), 1991 (91), 1992 (92), 1993 (93)

NPD Part Number : M-1102-32DBG
Manufacturer Reference #'s: 140-4503-BD