DISC CONVERSION KIT, FRONT BRAKE, WILWOOD, 5 LUG DESIGN, DYNAPRO LUG MOUNT DYNAMIC DRAG BRAKE KIT, INCL (2) DYNAPRO 4 PISTON CALIPERS ( GRAY ANODIZED), (2) 10.75 INCH DRILLED ROTORS, HUBS, PADS AND MOUNTING HARDWARE, THIS KIT NOT ONLY UPGRADES YOUR FACTORY BRAKES BUT ALSO CONVERTS TO 5 LUG
If you are looking for the best performance drag racing front brake setup for your Foxbody Mustang then this Dynapro Lug Mount Front Dynamic Drag Brake Kit from Wilwood is just what you want! This Wilwood kit not only removes weight over factory brakes but also delivers Hi performance braking all while mounting to your factory V8 spindle. This kit includes bolt on brackets, forged billet aluminum 5 lug hubs, 10.75 inch direct mount steel drilled rotors & Wilwoods Dynapro Lug Mounted (4) piston calipers with gray anodized finish. All required mounting hardware and pads are also included. So if you are looking to covert to 5 lug and do some serious drag racing then this kit from Wilwood is for you.
Manufacture Note:
Wilwoods newest Dynapro Front Dynamic Drag kits will soon be drag racings most popular front brake kits. DPL kits used on four-wheel disc cars weighing up to 2,800 pounds, or rear drum brake equipped cars weighing up to 2,400 pounds. Dynamic rotor mounting adapters with t-nuts promote less distortion due to temperature and extends rotor life. Forged billet DPL four piston calipers mount directly to the spindle with an aluminum bolt-on brackets. Forged billet, five lug hubs with direct mount steel rotors combine to provide an average weight savings of over 30 pounds compared to stock drum or disc brakes. Kits include all new hardware, wheel bearings, seals and extra length lug studs.
Installation Note:
This Wiliwood Dynapro Lug Mount Front Dynamic Drag Brake Kit requires spindle modification as well as drilling and tapping the factory spindle. It is recommended that this be done by a machinist or your local performance shop. This kit requires Wilwood Brake line kit M-2078-30WWB for 87-93 Mustang.
This Brake Kit may fit 15-inch wheels. Please refer to the wheel clearance diagram to check to see if it will fit your specific wheel.
Feel free to download the installation instruction as well as see the Wheel Clearance diagram before installation or purchase of this kit.
Note:
THIS BRAKE KIT HAS A HUB OFFSET OF: +.49This Hub Offset will move the wheels outward from the fender by this amount on each side of the vehicle.
Ford Mustang Years:
1987 (87), 1988 (88), 1989 (89), 1990 (90), 1991 (91), 1992 (92), 1993 (93)
NPD Part Number : M-1102-33DBG Manufacturer Reference #'s: 140-14420-D
1987-1993 MUSTANG 5.0L OR W/ 87-93 V8 SPINDLE SWAP
0-0 REQS 15 INCH MINIMUM WHEEL DIAMETER, OE HUB OFFEST +.49
0-0 REQS MODIFICATIONS TO ORIGINAL SPINDLE, DRILLING AND TAPPING
0-0 REQS P/N M-2078-30WWB LINE KIT,
0-0 DIRECT MOUNT STEEL ROTORS, DRAG RACE ONLY
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
This item has a preset shipping charge of $25.00
This item is a "made to order" product and will ship directly from the manufacturer.
Please allow 1-8 weeks for delivery.
Please note that some manufacturers have longer lead times.